Dajishan Tungsten Mine Concentrator (2)
According to the characteristics of black tungsten coarse grain inlay, a three-stage jigging is implemented. The coarse and middle two-stage jigging tailings are dewatered by a spiral classifier and then fed into the rod mill. The final grain size requirement of the grinding is greater than 1.7mm, the fractional content is less than 15%, the content less than 0.074mm is less than 12%, and the rod mill and double layer vibrating The sieve constitutes a closed circuit. The double-layer vibrating screen is less than 1.7mm into the fine-grain jig and the jig tailings into the hydraulic classifier. The hydraulic classifier divides the ore less than 1.7mm into four grades and sends them to the shaker for sorting. The shaker is selected for two-stage operation, and the second-stage shaker is re-grinded in the ore. The grinding grain size is less than 0.5mm and the grain content is 85%. After the second-stage grinding product is graded, it is then selected into the shaker and selected from the original ore. The separation of the 1.7mm grain grade ore is separated into separate treatment systems to form a lean and rich sort.
The primary slime and secondary slime are treated centrally, and the sorting equipment is mainly based on the grooved mud shaker and the spring shaker.
The re-election process fully considers the characteristics of the wolframite, and adopts three-stage jigging, four-stage shaker, mud-sand sorting, lean-rich sorting, shaker-mine re-grinding and other processes, especially multi-stage Jigging, the recovery rate of jigging accounted for 62.61% of the re-election.
See the table below for the recovery index of each equipment unit in the re-election section. The process flow and mineral processing indicators are shown in the following figure:
Re-election section of ore dressing equipment unit recovery index
Equipment unit | jump  Eliminate | Mineral sand shaker | Slime shaker | Combined  meter |
Job recovery rate, % Recycling recovery rate, % | 71.60 62.61 | 86.35 21.45 | 41.29 5.19 | Â 89.25 |
Hydraulic Control Valve,Hydraulic System Flow Control Valve,Flow Control Valve Device,Automatic Hydraulic Control Valve
Shuyang County Huji town Desheng hydraulic machinery factory , https://www.dshydraulic.com