How to handle test products?
The coarse product of the flotation test can be directly filtered. If the product is very fine or contains a lot of mud, it is difficult to filter. At this time, it can be directly placed on a hot plate or an oven to evaporate. It is also possible to add a coagulant, such as adding a small amount of acid or alkali, alum, etc. to accelerate the sedimentation, extracting the clear liquid and drying it. dry. During the drying process, the temperature should be controlled below 110 °C; if the temperature is too high, the sample will be oxidized and the result will be scrapped. For example, when the sulfide mineral is at a high temperature, S oxidation becomes SO 2 volatilization, resulting in sample grade change. After the flotation product is dried and weighed, it must be shrunk and ground for chemical analysis. The particle size of the sample for chemical analysis should be less than 100 mesh or 150 mesh.
|
QYM-Temporary Fence Temporary fence, also called portable fence, which is convenient both in installation and movement. You can see temporary fence everywhere in construction sites, temporary protection, major sports events or activities, temporary isolation, quarantine station in the airport, large playgrounds and so on.There are two types of the temporary fence, one is mesh infilled, the other is pipe infilled. The surface treatment can be galvanized + polyester powder coated, or hot dipped galvanized. |
Temporary Fence,Temporary Fence Gate,Temporary Perimeter Fencing,Movable Fence Temporary Fence
Hebei Qianye Metal Product Co., Ltd. , https://www.qymsteelfence.com