Application of Flow Coordinate Measurement in 3D Measurement of Mold
In recent years, the rapidly developing movable articulated coordinate measuring machine has the characteristics of being light, flexible, simple and practical, and is particularly suitable for performing measurement work that is difficult to access by other instruments on the shop floor. The joint-type three-coordinate measuring instrument exhibited by Fardarm in the United States adopts high-precision grating and built-in balance system. The instrument has a temperature compensation sensor inside, which can automatically correct and compensate the influence of ambient temperature. The developed CAM2 measurement software can be used for reverse engineering. Product development, production testing and statistical analysis, accuracy up to 0 025mm / 12m ball. The Ampg movable joint measuring system exhibited by Zettmess in Germany has 6 rotary joints. The joint arm material is made of alloy aluminum with surface anodized carbon oxidation and CFK pipe with light weight and firmness. The measurement repeatability can reach 0 04mm/18m ball. . An articulated coordinate measuring machine produced by Poli, Italy.
Poli articulated three-coordinate measuring instrument Flow optical three-coordinate measuring machine is a variant of the coordinate measuring machine, suitable for mobile use in the workshop. During measurement, the measurement system projects a beam of light onto the workpiece to be measured. Based on the optical triangulation measurement principle, the optical tape image is read by the camera, and after analysis by the digital image processor, the three-dimensional coordinates of the workpiece can be accurately calculated. The application of the Atos mobile optical coordinate measuring machine developed by Hong Kong Baoli Machinery Co., Ltd. in the three-dimensional measurement of the mold.
(Finish)
Pneumatic quick connector is a kind of quick connector which is mainly used for air piping and pneumatic tools. It can connect or disconnect the pipeline without tools. When the connector is not connected - when the parent's ferrule moves to the other end, the stainless steel ball will automatically roll outward, and the daughter will be disconnected under the action of the common valve spring force of the parent and the daughter, and the daughter and the parent's valves will be closed respectively, The fluid flow is blocked instantaneously.
Purpose and features editing voice
The quick connector is suitable for the connection of pneumatic pipeline, compressed air and nitrogen, and the working position where the pipeline can be loaded and unloaded frequently, such as the operation of pneumatic tools in the assembly line. It can also be used in hydraulic machinery, chemistry, ship piping, etc.
Scope of application editing voice
Air pipe, air compressor, grinder, air drill, impact plate hand, air transport screwdriver and other pneumatic tools for quick connection.
Note edit voice
1. Please do not use it for any purpose other than quick fluid connector.
2. Please don't use it for other fluids.
3. Please do not connect with the quick fluid connector made by other company.
4. Do not exceed the maximum pressure when using.
5. Do not use outside the temperature range to prevent the sealing material from wearing or leaking.
6. Do not hit, bend or stretch artificially to prevent damage.
7. Do not use it in places mixed with metal powder or sand dust to prevent poor work or leakage.
8. If foreign matters are attached, it will cause poor work or leakage.
9. Do not remove the quick coupling.
Pneumatic Connector, Plastic Pneumatic Connector, Pneumatic Quick Connector
Glove Industry Co.,Ltd. , https://www.glovemech.com