2 major causes of electronic scales can not be calibrated

Electronic platform scales as a weighing electronic scale, we will inevitably have some problems in the use of electronic scales. One of the common problems is that it cannot be calibrated, and the battery can't store power, and the digital system can't jump. Today's hard-wired electronic platform scale manufacturers want to introduce the article on the two major causes of electronic scales can not be calibrated, as long as we know what causes the electronic platform scales can not be calibrated know how to solve this problem. Details can be found below.

Electronic bench scale working principle introduction:

The heavy object is placed on the weighing platform of the electronic platform scale. Under the action of the object's gravity, the elastic body of the load cell produces deformation. The weight passes the weight through the scale body to the load cell, and the sensor converts the weight signal to the corresponding m. V voltage signal. This signal is amplified by a preamplifier. Filter filtering, A/D conversion, and the microprocessor displays the weight signal, the digital display directly shows the weight.

2 major causes of electronic scales can not be calibrated:

(1) There are too few weights for calibration.

(2) The weight weight deviates too much from the nominal value.

The above is about the two major causes of the electronic scales can not be calibrated. This article is provided by Shanghai Shigan Industrial Co., Ltd. Thank you for your support to our company! More information on electronic scales, welcome to inquire. Readers who have read this article have also read: Stainless steel electronic scale battery can not be stored in detail to solve the steps!