Oscillating incubator maintenance

Oscillating incubator maintenance:

1. Accurately use and pay attention to the maintenance of the instrument, so that it is in a good working condition, can extend the life of the instrument.

2. During the continuous operation of the instrument, regular inspections shall be performed every three months; check the fuses, control components and fastening screws, and if any water droplets, dirt, etc., shall fall on the motor and control elements.

3. The bearing of the transmission part has been filled with a proper amount of grease (No. 1 Calcium-Naki) before leaving the factory. During continuous operation, the grease should be filled every six months. The filling volume accounts for about 1/3 of the bearing space. .

4. Instruments are often used, and natural wear is normal. One year after the instrument is used, if the motor or compressor is found to have abnormal noise, the bearing of the transmission part is worn out, the belt is loose or cracked, and the electronic control element fails, the company will continue to provide quality services and be assisted.

5. The compressor should avoid continuous start.