Double Nozzle LPG Dispenser (RT-LPG 124K)

Product Description

Technical performances:
»  Ambient temperature: -25°C to +55°C 
»  Standard speed (40 l/min) 
»  LPG one- and two-hoses (linked to product model) 
»  Gas separator equipped with a large filter to better clean the product without affecting the flow rate. 
»  RFID remote control compatible (option)
»  IC card management system with internet(option)
»  Cold climate: -40°C to +55°C (optional) 
»  Temperature of fluid: -25°C to +25°C 
»  Relative humidity: 5% to 95% 
»  Accuracy: ±0.3%
»  Digits of display: 8-8-6 (Sale-Liter-Price)
»  Automatic temperature compensation
»  Electronic / Mechanical calibration
»  Preset functions via push buttons 
»  Wide range of LPG nozzle options 
»  Safety relief valve 
»  Low temperature kit (option)
»  Stainless steel body( option)

 WHY BLUE SKY?

1. Blue Sky used to be the first factory special for dispenser controller in China. With over 20 years' history in this field and continuous optimization & innovation, Blue Sky makes controllers with as many functions as you like.

2. Almost every part is made by Blue Sky itself, including controller, flowmeter and pump, since Blue Sky finds that other factories' products cannot meet its demands and requirements due to the increasingly thriving business all over the world.

3. Professional, steady and advanced as Blue Sky is, its products already passed ATEX, OIML and other standards.

4. With top-ranking staff, some of which are from the first dispenser factory in China, and some belong to the new generation, Blue Sky dispensers boast sound market reputation, extensive business channels, solid customer foundation and strong market competitiveness.

5. Persisting to the principle of "making trade services the forerunner of the business", Blue Sky will strive for high efficiency, passion, integrity to provide customers with superior trade services.

 

Description:

The ignition analyzer can be used to measure each cylinder speed of the car engine, high voltage ignition coil ignition voltage and the injection time of each cylinder. It is induction type, without dismantling any pats, you can test the general distributor type SPW and ignition coil type COP. It can dynamically display the parameters and display the maximum and minimum range.

 

1. Measures RPM
2. Measures spark volt
3. Measures spark burn time
4. Advanced microcontroller technology
5. No ground wire connections required

 

Functions:
1. Minimum and Maximum functions (For COP and SPW modes)
It maintains a continuous record of the minimum and maximum readings of the function currently selected. To display the Minimum and Maximum readings of the main display, if not already selected press` Secondary Function/Capture` Button momentarily. To reset the Minimum and Maximum readings, press the `Power ON/OFF/Reset` button momentarily. These values are also rest when turning to [0".

2. Spark KVOLT Calibration function (For Cop mode only)
It requires the user to calibrate the instruments in order to measure spark KVOLT in coil on plug and coil near plug ignition systems.
This calibration uses the measurement values obtained during the procedure to find the optimal measuring parameters or a particular type of ignition module, and compensates for differences in waveform and signal strength.
Once the Ignition Tester has been calibrated on one of the ignition modules of the engine being diagnosed, all the subsequent measurement of spark KVOLT will be relative to the calibration value. 

 

Features:
1. Capacitive pick-up
2. Flexible probe
3. Protective rubber holster
4. LCD display
5. Power ON/OFF/RESET button
6. Secondary Function/Capture button
7. Ignition system button
8. Main Function/Calibrate button
9. Engine Cycles button.

Ignition Tester

Ignition Tester,Ignition Coil Tester Tool,Ignition Coil Test,Ignition Spark Tester

Shenzhen Cartrend Technology Co, Ltd , https://www.cartrendthings.com