What are the methods of using explosion-proof platform lights?

Explosion-proof platform lights are suitable for fixed lighting in flammable and explosive places such as petrochemical plants, petroleum platforms, gas stations, oil pump rooms, and transfer stations; Zone 1 and Zone 2 gas environments; Zone 21 and Zone 22 combustible dust environments.
According to the actual needs of the work site, determine the installation location and method of the lamp, and then prepare a corresponding length of Φ8~Φ14 mm three-core cable for the distance from the lamp to the power contact, and thread the three-core cable into the laid steel pipe.
Unscrew the compression nut of the lamp cable inlet (it is equipped with the factory and will not be used after the steel pipe is used), lead the power cable into the internal wiring, connect and fix it, and then tighten the cable steel pipe and tighten the lamp top cover , Tighten the set screw.
When replacing the bulb, unscrew the Phillips pan head screw that fixes the lamp ring, and rotate the lamp ring counterclockwise to separate the lamp ring and the transparent part from the housing, remove the bulb, replace it with a new one, and press the opposite direction Just install the lamps.
Warning: 1. When installing and maintaining lamps, the power supply must be cut off. 2. Non-professionals are not allowed to install or remove lamps at will.

Weld Studs

Weld Studs,Stud Welder Studs,Metric Weld Studs,Stainless Steel Weld Studs

CHANGZHOU JINDA WEDLING CO.,LTD , https://www.jd-welding.com