• Posted on

Veken battery revenue of 690 million yuan in the first half of 2016 increased by 13773%

August 8th news, Vico Battery (835456) recently released the first half of 2016 report shows that as of June 30, 2016, the first half of 2016 operating income was 690 million yuan, an increase of 108.61% over the same period of last year; net The profit was 20,465,500 yuan, an increase of 13,772.80% over the same period of the previous year.
As of June 30, 2016, the total assets of Veken battery were 1.198 billion yuan, up 26.04% from the beginning of the period. The net assets attributable to the listed company's shareholders were 255 million yuan, an increase of 7.79% over the beginning of the period.
The operating income of Veken Battery in the first half of 2016 increased by 108.61% compared with the same period of last year, which was mainly due to the significant rebound in overall operating results and the year of 2015. The overall growth rate of the downstream mobile phone industry slowed down, the industry concentration increased further, and the sales revenue during the reporting period. The substantial growth was due to improvements in the company's customer structure and product structure.
According to the data of the Dikaibei New Board Research Institute, Vico Battery is engaged in the manufacture of lithium-ion batteries, providing customized lithium battery products for consumer electronics manufacturers such as mobile phones and tablet PCs.

Stainless Steel Precision Casting

Stainless steel precision casting or stainless steel investment casting, silica sol process. It is a casting process with little or no cutting. Cast stainless steel is an excellent process technology in the foundry industry. Its application is very extensive. Stainless steel cast not only applies to the casting of various types and alloys, but also produces the dimensional accuracy of castings. The surface quality is higher than that of other casting methods, and even castings that are difficult to cast and which are difficult to cast have high temperature resistance and are not easily processed can be cast using investment casting.

In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.

In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.

In shell hardening process,we use aluminium chloride to harden the shell.This can make the shell so hard that it can`t be distorted,at the same time the bug which the casting may have will be decreased.If there are letters or numbers in it,they will be much clearer.

In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of.This can effectively avoid the air-hole and sand-hole,making the casting look much nicer.

In smelt process,we use middle frequency furnace,avoiding the emergence of the oxide; in molten steel control part,we use Germany-imported direct reading spectrometer machine,assuring its quality before the molten steel out of the furnace.During this process we use ERP production and management software to get the feedback information.

In shell-knock out process,we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.

In shot-blasting process,we have crawler-type and hanging shot-blasting machine,with steel shot 0.5-0.8,making the products smooth.Of course,if the customer wants it look much nicer,we also can carry out sand-blast treatment.

In heat treatment process,we use electric furnace,and adopt double-temperature control in order to heat the products equally.As a result, the products will have great metallurgical structure.

Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.

In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.

Products in stainless steel cast factory divide into pump valve accessories casts, food machinery casts, and architectural hardware casts.

Stainless Steel Precision Casting


Stainless Steel Precision Casting, Stainless Steel Investment Casting,Investment casting products,Cast Stainless Steel

Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com