Things to do after the vehicle soaks! - wading insurance
What should I do if the vehicle is soaked? Many northern friends feel that this is a long way from yourself, but do you know? Now that the South has entered the rainy season, Sichuan, Guangxi, Hunan, Guangdong, and Fujian have all encountered heavy rainstorms. What followed was the flooding of many people’s cars.
The temper of God is not easily touched by the average person, and he is not allowed to have heavy rain on it. In order to prevent it, we must first understand, if unfortunately the car unfortunately "falls into trouble" and is really bubbling, how do we first rescue?
1, the trailer is to first drag the vehicle out of the water, of course, is to wait for the rain after the stop, to ensure personal safety under the premise of the trailer, if they do not decide, they find the road to rescue, because the rain on the vehicle interior corrosion is particularly serious, The longer the time, the greater the damage, so be sure to drag out as soon as possible.
2. After draining the car, the drainage hole of the vehicle shall be opened first. Under normal circumstances, the drainage hole will be under the seat.
3, after the cleaning and disinfecting drainage, must open the door, sunroof open, exposure to the sun under the sun disinfection, the purpose is to drain the vehicle's moisture.
In addition, the electronics module must be replaced, the seat must be disassembled, and the foam cleaner must be used for thorough cleaning.
4, four-wheel bearings must be replaced because rain will make the bearing sealed lubricant deterioration, will be serious to traffic safety, because the loss of lubrication may lead to bearing fracture, so be sure to change.
5. Do not attempt to start the vehicle after the engines and gearboxes are bubbling. The insurance company refused to pay compensation for the engine flood caused by wading.
Therefore, we should report insurance as soon as possible. Then, after the loss is determined, it is sent to the repair shop or 4S shop for inspection. Here we don't talk about inspection items and maintenance procedures. The maintenance of the engine and gearbox is really too professional. Professional things can only be done by professional people.
In addition, if all kinds of lights, brakes, airbags, and trip computers are immersed in rainwater, they all need to be replaced. We must not think that this matter can be dealt with.
In fact, the most important thing is to take the insurance process once the car is blisters, the car owner's urgency to understand our understanding, but no matter how to deal with the vehicle, we must wait for the insurance company after the loss.
Before the damage control result comes out, what we can do is try not to touch the car. This is to minimize your losses.
How to take the insurance process? Xiao Fei briefly introduced it to everyone, but the specific details of each insurance company are not the same, we must take the provisions of the insurance company.
The first time with the insurance company reported the scene of the insurance and retained evidence waiting for the insurance company to determine the damage and lead the company to wait for compensation from the insurance company Tips: Regardless of how sad you are, you must take photos to keep the evidence, this is very critical and can reduce your economic losses.
Clone
Mold pouring, clone production; integrally formed, reject splicing bodor laser cutting machine cutting 500w fiber cutting machine
Durable
Using flake graphite cast iron, the lowest tensile strength of which is 200MPa. High carbon content, high compressive strength and high hardness. Strong shock absorption and wear resistance. Low thermal sensitivity and bed gap sensitivity reduce the loss of equipment in using, so the machine accuracy could maintain for a long time, and no deformation in a life cycle.
Super-power, for thick and thin plates
Equipped with high/super power laser device, efficient thick plate cutting is no longer a dream, thin plate cutting is more speedy; BODOR database of cutting process will provide you with data support of performance and energy saving to save your cutting cost. Tailor-made high power laser machine for customers, its maximum cutting range includes 50mm aluminium plate, 130mm stainless steel and 70mm carbon steel plate.
Laser Cutting Machine,Laser Engraving Machine,Cnc Laser Cutting Machine,Metal Laser Cutting Machine
Jinan Bodor CNC Machine Co., Ltd. , https://www.bodorcnc.com