Sewage suction car small bump does not matter to repair how to do
It is unavoidable that there will be small bumps in the daily operation of the sewage suction truck and driving. In fact, most of the sewage suction truck drivers do not have much worry about bumping the vehicle because they are all public cars. Breaking through the “skin†and lacquer will not affect the daily work. If it is a sewage suction truck that does not suffer from serious damage to the vehicle's watch, many drivers will not go through the inspection and treatment, and will choose to carelessly leave the body with a "speckled spot" to continue operations. Of course, people are not able to compare with each other. There is also a kind of love house and Ukrainian driver. When the vehicle encounters a bump, they still choose to drive the vehicle to a service station or a professional repair shop. Refinishing or putty, to restore the damage to the car's watch. When repairs are made, it is necessary to look at the degree of damage and the location of the damage. It may take 1-3 days.
Because of the special nature of the work of the sewage suction truck, it is not a matter of saying that there will be a little frictional bump in the use of the vehicle. It will not only waste a lot of time, but it will also cost a lot of money. If the extent of the affected area is relatively large, which directly affects the performance and appearance of the vehicle, then it is still necessary to go through the normal maintenance process. Now it is a technology that can quickly repair the dents of sewage suction vehicles, which is called non-destructive repair. In fact, non-destructive repair is not a rare repair technology, and now there are many sewage suction car manufacturers will also choose to use such similar repair technology to check some of the damaged vehicles at the factory. Non-destructive repair has some advantages such as low maintenance costs, relatively short time-consuming, etc., and can be favored by many drivers. Because this technology will greatly affect the turnover of some auto repair factories, it is still being killed by people in the industry.
Non-destructive repair technology means that the body is repaired without the need for painting and sheet metal. It will use some special suction tools and crowbars. More experienced repairman only needs to be able to fix the position of the sunken surface of the suction truck in 1-2 hours. Marked, the cost is more cost-effective above, a few hundred dollars. When driving daily, you should drive and work mainly on safety, and do a good job on the maintenance of the sewage suction truck. The vehicle can provide a safe driving environment for you to be better and safer.
Aluminum wire includes aluminum silicon wire ER4043, aluminum-magnesium wire ER5356 and other aluminum alloy wire.
Pure aluminum wire ER1100 Features: pure aluminum wire, aluminum content ≥ 99.5%, with excellent corrosion resistance, high thermal conductivity and conductivity, and excellent machinability. For anodized materials, the need for color is very ideal, recommended for welding 1000 series aluminum alloy. Typical chemical composition: Si≤0.03, Cu≤0.002, Zn≤0.013, Fe≤0.18, Mn≤0.003, AL allowance is widely used in railway locomotive, electric power, chemical, food and other industries.
Al-Si alloy wire ER4047 Features: This product is silicon 12% alloy wire, suitable for welding all kinds of casting and extrusion molding aluminum alloy. Low melting point and good liquidity make the base metal welding deformation is very small. Typical chemical composition: Si 12, Mg ≤ 0.10, Fe ≤ 0.80, Cu ≤0.03, Zn ≤ 0.20, Mn ≤ 0.15, AL allowance Use: welding or surfacing light alloy processing industry.
Al-Si alloy wire ER4043 Features: This product is silicon-containing 5% alloy wire, suitable for welding cast aluminum alloy Typical chemical composition: Si 5, Mg ≤ 0.10, Fe ≤ 0.04, Cu ≤ 0.05, AL allowance Use: Locomotives, chemicals, food, sports equipment, molds, furniture, containers, containers.
Aluminum-magnesium alloy wire ER5356 Features: This product is magnesium alloy with 5% alloy, is a versatile wide range of welding consumables, suitable for welding or surface surfacing 5% magnesium cast and forged aluminum alloy, high strength, Good, good corrosion resistance. This product can also provide a good color for anodized welding. Typical chemical composition: Mg 5, Cr 0.10, (Fe + Si) 0.3, Cu≤0.05, Zn 0.05, Mn 0.15, Ti 0.1, AL allowance Use: bicycles, aluminum scooters and other sports equipment, locomotive, chemical pressure vessels, Production, shipbuilding, aviation and other industries.
Aluminum-magnesium alloy wire ER5183 Features: This product is magnesium alloy with 3% of the alloy wire, welding or surface welding for the same level of aluminum alloy material. Typical chemical composition: Mg 3.5, Cr 0.2, Fe 0.15, Cu≤0.05, Zn 0.10, Mn 0.05, Ti 0.1, AL allowance Use: chemical pressure vessel, nuclear industry, shipbuilding, refrigeration industry, boiler, aerospace industry.
We have Mig Spool Aluminum welding wire, size 0.6mm, 0.8mm, 1.0mm, 1.2mm etc. TIG straight aluminum welding wire, size 1.6mm, 1.8mm, 2.0mm, 2.4mm, 3.2mm etc. Aluminum alloy welding wires can Pack with 0.5kgs, 2kgs, 5kgs, 7kgs, 15kgs etc.
Aluminum Welding Wire,5356 Aluminum Welding Wire,Aluminum Alloy Welding Wire,Aluminum Mig Welding Wire
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com