The most effective fuel saving method for heavy duty wreckers
Due to the scope of his work, a heavy-duty wrecker should be a relatively oil-consuming vehicle. Here are some ways to save fuel.
During the process of wrecker driving, pay attention to the water temperature table, and the normal water temperature of the engine should be maintained between 80°C and 90°C. If it is too high or too low, it will increase fuel consumption. Special attention should be paid to the fact that if the water tank is insufficient, the water temperature can quickly rise. When the water temperature exceeds 95°C, the fuel consumption is increased by 30%-40% compared to the normal temperature, and the wear and damage to the machine parts can easily occur. Regularly check the oil and lubricant level, and change the oil and lubricant according to the schedule.
Correctly maintain the engine, select the brand's authentic engine oil, remove the accumulated product of the cylinder combustion chamber and the spark plug, and find that the problem is eliminated at any time. Even a small fault will reduce the power of the engine and waste fuel. Regular replacement of air and oil filters will affect fuel consumption.
At the same time, if you feel that your car is running out of power, you have to stop to see if there is a leak in the tire. If the tire pressure is too low, the fuel consumption will increase significantly. Keep the balance of the tire, check the tire's pattern from time to time to see if there is any uneven wear. At the same time to see if there is no sharp object embedded in the tire and cause a gradual leak. Always check the tire pressure to keep it in the best condition. Not enough gas or too much gas will increase fuel consumption. Therefore, tire pressure should be checked regularly. As long as there is a tire less 4kPa, this tire will reduce the life of 10,000km, but also make the total heavy fuel consumption of the heavy wrecker .
Catalogue
Hoisting Equipments |
|
Hoist Pulley |
|
Disc Brake |
Company Introduction
workshop show
Factory Equipments
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures.
Certificates
Contacts
Hoisting Equipments
Hoisting Equipments,Hoist Lifting Equipment,Micro Hoisting Equipments,Lifting Equipment Hoisting
Luoyang Hongxin Heavy Machinery CO., TLD. , http://www.hxreducer.com