Environmental sanitation inspections and other inspection standards have greatly improved the environment
It is reported that sanitation transportation units, construction sites, mud terminals, and social transportation slag transport vehicle units must be equipped with vehicle cleaning and cleaning EQUIPMENT. Newly-purchased suction trucks, sewage suction trucks, sweeping vehicles, and sprinkler vehicles should meet environmental protection requirements; small compression stations and garbage transfer stations must have a sewage discharge pool, and conditional operating points must also be constructed for sewage discharge facilities so that vehicles can move in time. Sewage.
The department of city appearance and environmental sanitation stated that from August 11 to September 10, the city’s motor vehicle cleaning management office combined with the traffic police and the City Appearance Supervision Corps and other organizations jointly inspected the uncleaned vehicles on the road, especially the cover deformation and garbage. Flying, running, leaking, not
Closed vehicles and machine sweeping vehicles, suction dust during the operation process of dust, noise, and vehicles that do not avoid operating during peak traffic hours, according to the punishment and record the record.
It is reported that once an untidy slag transport vehicle is found, it will be included in the penalty filing list and rectified within a time limit; two vehicles entering the record for punishment will be permanently disqualified from online reporting; the suction truck that has serious problems will not be corrected if it is not in place; Sewage vehicles, sweepers, and sprinkler vehicle units will be fined in addition to being exposed.
The introduction of mechanical sanitation suction trucks, sewage suction trucks, sweepers, and sprinklers has improved the efficiency of sanitation work in our district. The conversion rate of sewage storage tanks and sewage pipes of garbage trucks must reach 100%, and all garbage trucks in the suburbs should be sealed. The reporter learned from the city appearance and environmental sanitation bureau that the city appearance
The environmental sanitation department officially launched the sanitation garbage truck compliance campaign this week to ensure that the garbage in the inner ring line did not fall. The introduction of the vacuum suction truck also ensured a significant improvement in the environment of the sewage pool and toilet bowl.
“The cleanliness rate of the transport capacity of the pulper and the sanitation vehicle in the downtown area must reach 35% and 85%,†said the responsible person of the city appearance and environmental sanitation department. It is understood that there are currently more than 3,000 sanitation vehicles in Shanghai. According to the pledge, the removal and transportation of domestic garbage should be prevented from secondary pollution; the garbage should not be allowed to fall within the inner ring line; the spread of odor should be controlled and the percolation leakage should be eliminated; the garbage in other areas must not be scattered; Eliminates uncleanness, leaks, etc.
Brake levers are usually mounted on the handlebars within easy reach of the rider's hands. They may be distinct from or integrated into the shifting mechanism. The brake lever transmits the force applied by the rider through either a mechanical or hydraulic mechanism.
Bicycles with drop handlebars may have more than one brake lever for each brake to facilitate braking from multiple hand positions. Levers that allow the rider to work the brakes from the tops of the bars, introduced in the '70s, are called extension levers, safety levers or, for their reputation for being unable to actuate the full range of travel of the main brake lever, suicide levers. Modern top-mounted brake levers, called interrupt brake levers, use an entirely different method of actuation and are considered safer.
The mechanical advantage of the brake lever must be matched to the brake it is connected to in order for the rider to have sufficient leverage and travel to actuate the brake. Using mismatched brakes and levers could result in too much mechanical advantage and hence not enough travel to properly actuate the brake (v-brakes with conventional levers) or too little mechanical advantage, requiring a very strong pull to apply the brakes hard (v-brake levers with other types of brake).
Bicycle Brake Lever, Bike Brake Lever, Road Bike Brake Lever, Hand Brake Lever
Hangzhou Datasports Equipment Co.,Ltd(Oembicycle) , http://www.oembicycle.com