Seat maintenance is key how to maintain the car seat

Fabric fabric seats are relatively simple to dispose of. When the flocked seat is not very dirty, it can be used with a long-haired brush and a strong suction vacuum cleaner. When brushing the seat surface, suck the dirt out with the suction mouth of the vacuum cleaner. For particularly dirty seats, the following steps should be taken when cleaning: first use a brush to clean the dirty part, then use a clean cloth dipped in a small amount of neutral detergent, wipe the seat thoroughly in semi-dry semi-wet case The surface, and finally with a vacuum cleaner to clean the seat and eliminate excess moisture.

Use a vacuum cleaner to remove dust and debris. If dust condenses on the velvet or is difficult to remove with a vacuum cleaner, brush it with a soft brush and suck it with a vacuum cleaner.

Wipe the surface of the fiber with a dry cloth, then dry the seat fiber thoroughly. If the flannel is still dirty, wipe it with mild soapy water and warm water and dry it thoroughly.

If dirt doesn't clear out, try the fiber cleaners on the market. Use this cleaner first in a less obvious position to make sure it does not have a negative effect on the flannel. Use this cleaner according to the instructions.

Usually do not eat in the car is best not to eat must not be when must pay attention to, do not let the food fine slag falling on the seat, in order to avoid the growth of aphids or other microorganisms and produce strange smell.

Door Hardware

The classification mainly includes the aluminum or zinc alloy die casting Machinery Parts using in Door Hardware area.
In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4.
Process Technology: High pressure die casting,Shot Blasting,NC Machining,Spray Coating
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Flow Processes: Die casting, Degating,Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging,Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Hardware Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo

Die Casting Door Hardware Parts,Aluminum Die Casting Door Hardware Parts,Zinc Die Casting Door Hardware Parts,Malaysia Zinc Part

NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.bolangautoparts.com