Nearly 800 new projects in 2013
China Drying Network In 2013, Fuxin City will implement 1824 investment projects with a total investment of more than 10 million yuan. The total investment will exceed 300 billion yuan. Among them, there are 1024 projects under construction, with a total investment of 150 billion yuan; 800 new projects, with a total investment of 150 billion yuan. Among the newly-started projects, there are 300 projects with a total value of 50 million yuan and a total investment of 140 billion yuan; 500 projects with a total value of 50 million yuan and a total investment of 10 billion yuan.
In 2013, we must highlight major project construction. Focus on the newly started projects with more than 50 million yuan, especially 150 billion yuan. At the same time, it is necessary to strengthen the project reserves and improve the level of project work.
Read the major project list in 2013. The project has a large number of projects, large investment, good structure, and bright spots. 1824 projects with a total investment of over 10 million yuan are closely centered on the construction of the "ten industrial clusters" in Fuxin City, with the direction of deep processing of products. For example, the coal chemical project of Zhangwu County Yingde Investment (Shanghai) Co., Ltd. with an investment of 10.6 billion yuan uses the coal resources of the Zhangwu Leijia coalfield to build an annual output of 3 billion cubic meters of coal gas, 1 million tons of synthetic ammonia, and 1.7 million tons of urea. Production lines and supporting facilities; Invested 1.73 billion yuan of "Datang" 500,000 tons of LNG projects, using coal-based natural gas as raw materials, after the liquefaction process to form liquefied natural gas. The project is designed to process 500,000 tons (2 million cubic meters) of natural gas per day; in addition, there is an investment of 1.5 billion yuan in the development zone Liaoning Aerospace Shenkun Equipment Co., Ltd. Annual output of 5,000 high-end hydraulic support production projects, investment 6 billion yuan The Xihe District new Fuxin Agricultural Product Logistics Center project, the investment of 2 billion yuan in the Xihe Lake Songtao Lake eco-tourism development project, etc., will be implemented in 2013.
“After these projects are put into production and effective, they will fundamentally change Fuxin's industrial structure and accelerate the transformation of resource-based cities,†said Wang Wenge, deputy director of the municipal project office.
Deep project is the point of growth investment is "engine"
“The construction of the project is not only a long-term strategy for strengthening the stamina of development, but also a practical support for ensuring economic growth. It is also the top priority for the work in 2013. The municipal party committee and the municipal government determine that next year will be the 'year of project construction' and must give the city the strength to promote the project. The construction of the project will create a situation where the construction of the project will be 'overwhelming' and promote the development of the economy with the construction of the project." Wang Yang, secretary of the municipal party committee, stressed at the Third Plenary Session of the 11th Municipal Party Committee and Economic Work Conference.
Indeed, in the "troika" that drives the economy, exports and consumption do not dominate, and investment is the "engine" of the rapid economic growth in Fuxin.
A project is a new growth point; a group of projects is a new growth pole. The project is a carrier of investment, a driving force for development, and catching up with hope. In the past few years, a large number of projects such as the Papua New Railways, Datang Coal Gas, shanty town reconstruction, and wind power have been started, completed, put into operation, and brought into full play, effectively boosting the city’s overall economic growth. “The introduction of a leading project has brought about a series of related projects and eventually gathered into a single industry.†This is true for wind power projects, and for hydraulic projects, as well as for coal chemical projects.
Leapfrogging, catching up, and high-speed development are inseparable from large projects, and the magnetic field effects of large projects cannot be separated. Large projects can form a huge industrial chain and industrial clusters, and thus lead to more investment income and jobs, and enhance the level of urban development. On the other hand, batches of large-scale projects and good projects have also created material conditions for improving people's income and improving people's livelihood.
"Comprehensively judging the current economic situation, we must adopt a scientific attitude, fully understand the seriousness of the macroeconomic situation, and increase urgency. We must also base ourselves on new and distinctive features. The new economy is small in total volume and has the advantage of being backward. Our greatest advantage is also our direction and breakthrough.†At the Third Plenary Session of the 11th Municipal Party Committee and Economic Work Conference, Mayor Qi Jihui further proposed that “in 2013, the city must adhere to the project first, the project as the most important, and the 'project'. The “Year of Construction†activity will be used as a carrier to promote the expansion of investment scale and increase of growth rate. Investment will stimulate growth, structural adjustment, and increase income.†In 2013, the opening of 1,824 major projects also reflected the acceleration of industrial upgrading and upgrading of Fuxin. The confidence and determination of the scientific development level will also play an important role in promoting Fuxin's transformation of economic development methods, improvement of urban functions, and improvement of people's welfare.
Machining Stainless steel is the use of CNC machining out, including drilling, boring, cutting, turning, screw, etc.. Machining stainless steel commonly used materials: sus303304316.stainless steel has a very high hardness after machining, easy deformation, so in the process of rough machining to eliminate stress, and then finished. Surface treatment is generally passivation, we have specialized laboratories to test products, and ensure that each size to meet the requirements of the drawings, including the machining stainless steel application in various industries: automobile, ship, crane, medical equipment, industrial automation equipment.
Of course,we also accept the custom machining,welcome to contact us.
Machining Stainless Steel,High Precision Machining Stainless Steel,Cnc Machining Stainless Steel,Stainless Steel Machining,Steel Machining
Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com