Hydraulic Piston Pump Operation
1. They do not need external energy - the force of flowing water provides them with the required energy.
2. Their device is extremely simple, with only two moving parts.
The hydraulic oil pump of the hydraulic piston pump depends on the pressure and pressure of the hydraulic oil tank. After each time the machine is started, it must wait until the hydraulic tank reaches the operating pressure before operating the machine. Straight-axis swash plate type piston pumps are classified into two types, self-priming oil type. Most pressure-feed hydraulic pumps use pneumatic fuel tanks, and hydraulic pumps have their own charge pump to provide pressure oil to the hydraulic pump inlet. The self-priming hydraulic pump is highly self-priming and requires no external force for oil supply. For self-priming piston pumps, the fluid in the hydraulic tank must not fall below the lower limit of the oil scale, and a sufficient amount of hydraulic fluid must be maintained. The higher the cleanliness of the hydraulic fluid, the longer the service life of the hydraulic pump.
Fluid Bed Dryer is designed to introduce the hot air stream at the base of the product container which is filled with the material. Induced draught is created by means of blower and fresh air is sucked in to the unit. The fresh air is heat by means of electrical heaters or steam or thermic fluid heaters. This hot air stream expands the bed of material at certain velocity & creating turbulence in the product. The phenomenon is known as fluidisation and offer conditions which are almost ideal for drying. Fluidisation produces full agitation of solid particles and since each particle gets surrounded by hot air, heat transfer is extremely high and uniform. The product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer.
Fluid Bed Dryer,Fluidized Bed Dryer,Vertical Fluid Bed Dryer,Batch Type Fluid Bed Dryer
Changzhou Bole Tech Co.,Ltd , https://www.boledrying.com