Horizontal Siding Wall Panels Roll Forming Machine
Technical Data
1. Rolling speed: 15m/min(cutting time not included)
2. Rolling thickness: 0.3-0.8mm
3. Raw material: Galvanized steel sheet & pre-painted steel sheet, up to G550Mpa
4. Control system: PLC & Transducer (Yaskawa Japanese Brand)
5. Dimension: 4500x1600x1500mm
6. Effective width: 800mm
7. Roller stations: 6 stations
8. Roller material: 45# steel, coated with chrome
9. Shaft diameter: 100mm, material is 45# forge steel
10. Transmission: By gears
11. Material of chain: 45# steel with frequency quenching, 16A
12. Main motor power: 5.5Kw
13. Tolerance: 4m+-1.5mm
14. Electric source: 380V, 50Hz, 3 Phase
Control Panel( Panasonic)
1) Voltage, Frequency, Phase: 380V, 50Hz, 3Phase( this is can depend on customer request)
2) Automatic length measurement;
3) Automatic quantity measurement;
4) Computer used to control length& quantity. Machine will automatically cut to length and stop when required quantity is achieved
5) Length inaccuracy can be amended easily.
6) control panel: Button-type switch and touch screen
7) unit of length: Millimeter( switched on the control panel)
| main roll forming machine |  1 set |
| control box | 1 unit |
| out table | 2 units |
Wood pellet complete production line is euipment for making the wood log/wood chips/sawdust/wood shaving/rice husk/stalk/grass...raw material into fuel pellets, Main process: Wood Chipper --hammer mill--biomass dryer--Biomass Pellet Machine--pellet cooler--Pellet Packing Machine.
Wood chipper: make the wood log/wood branches/wood blocks/bamboo... into smaller chips. Finished products: 20-50cm.
Hammer Mill/Crusher: crush the wood chips/wood shaving/small blocks/grass/stalk...to 6-8mm powder. Finished products: 6-8mm.
Rotary Dryer: dry raw material into suitable moisture to produce high-level pellets. Finished moisture: 10-15%
Wood Pellet Machine: press crushed and dry sawdust/rice husk/straw/grass... into pellets. Finished pellets: 6/8/10mm.(Asian Market standard: 8mm; European Market standard: 6mm)
Cooling Machine: cool high-temperature pellets before packing.
Reason: the finished pellets are very hot and realease moisture as they leave the pellet machine. This section can ensure to generate smooth pellets.
Packing Machine: pack pellets into 20-50kg/bag or 1 ton bag. Advantage: easily to be transported to final users' site.
Pellet Machine Line,Straw Hay Pellet Production Line,Straw Materials Pellet Production Line,Straw Pellet Production Line
Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachine.com