Global Supply High Head High Flow Centrifugal Circulation Pump

SCM42 CENTRIFUGAL PUMP


Applications & Installation

This series pumps are single stage centrifugal pumps, with the character of high -efficient, power-saving and compact in structure, convenient to operate and maintain. They are suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluids, also can be applied to supply the water for garden, hotel, villas and agricultural irrigation,etc.
The hydraulic characteristic is with higher head and smaller capacity.

.

Performance
 
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C


Motor
★Two-pole induction motor 
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.


Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: Brass / Noryl / Stainless steel.
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide


Notes
Pumps should be installed in a dry and covered area, protected against the weather.






FAQ

1.Products

   a)Q:What products do you mainly produce?
       A:We mainly produce many kinds of small electric water pumps,such as:peripheral pumps,self-suction pumps,centrifugal pumps,deep well pumps,JET self-priming pumps,multistage pumps,booster pumps,automatic pump station and electric motors ,generators etc.

   b)Q:What do you use to pack the goods?
       A:In general,the goods will be packed with strong color or brown carton boxes with foam.
          (Also can be according to customers' requirements)
          
   c)Q: What is your MOQ of the products?
       A: 10-50PCS
   d)Q: What is the delivery time?
       A: 25-40 days after receiving your deposit or L/C.
  e)Q: Is it all right to make customer's own brand name?
       A: That's all right to make your own brand name. And please send us a authorization.
  f)Q: Where is your Loading Port?
       A: FuzhouPort,China
   g)Q: What are your payment terms?
       A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
   h)Q: What is your company's available production capacity?
       A: 35000 pieces per month.

2.Quality

    a)Q:How about your products' quality?
        A:99% qualified.
    b)Q:How can you prove your goods is good quality?
        A:We have a very strictly quality control systems,from the selection of materials to finished products,all should be checked by 3 times to make sure everything is right.
    c)Q:how many QC procedures do you have?
        A:At least 15 checking procedures,for example:inspection of the production plan, purchase plan,technical drawings,selection of raw materials;checking the quality ,appearance ,size,dimension of all raw materials before they come in our warehouse;our technicians will go to instruct our workers to assemble goods with proper way and go along with inspectors to check quality of goods when begin to produce goods;then we wil have a series tests to all goods to make sure our goods work perfectly.





  SCM42 CENTRIFUGAL PUMP


Applications & Installation

This series pumps are single stage centrifugal pumps, with the character of high -efficient, power-saving and compact in structure, convenient to operate and maintain. They are suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluids, also can be applied to supply the water for garden, hotel, villas and agricultural irrigation,etc.
The hydraulic characteristic is with higher head and smaller capacity.

.

Performance
 
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C


Motor
★Two-pole induction motor 
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.


Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: Brass / Noryl / Stainless steel.
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide


Notes
Pumps should be installed in a dry and covered area, protected against the weather.






FAQ

1.Products

   a)Q:What products do you mainly produce?
       A:We mainly produce many kinds of small electric water pumps,such as:peripheral pumps,self-suction pumps,centrifugal pumps,deep well pumps,JET self-priming pumps,multistage pumps,booster pumps,automatic pump station and electric motors ,generators etc.

   b)Q:What do you use to pack the goods?
       A:In general,the goods will be packed with strong color or brown carton boxes with foam.
          (Also can be according to customers' requirements)
          
   c)Q: What is your MOQ of the products?
       A: 10-50PCS
   d)Q: What is the delivery time?
       A: 25-40 days after receiving your deposit or L/C.
  e)Q: Is it all right to make customer's own brand name?
       A: That's all right to make your own brand name. And please send us a authorization.
  f)Q: Where is your Loading Port?
       A: FuzhouPort,China
   g)Q: What are your payment terms?
       A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
   h)Q: What is your company's available production capacity?
       A: 35000 pieces per month.

2.Quality

    a)Q:How about your products' quality?
        A:99% qualified.
    b)Q:How can you prove your goods is good quality?
        A:We have a very strictly quality control systems,from the selection of materials to finished products,all should be checked by 3 times to make sure everything is right.
    c)Q:how many QC procedures do you have?
        A:At least 15 checking procedures,for example:inspection of the production plan, purchase plan,technical drawings,selection of raw materials;checking the quality ,appearance ,size,dimension of all raw materials before they come in our warehouse;our technicians will go to instruct our workers to assemble goods with proper way and go along with inspectors to check quality of goods when begin to produce goods;then we wil have a series tests to all goods to make sure our goods work perfectly.





 

Sheet Metal Forming

Sheet metal forming processes are those in which force is applied to a piece of sheet metal to modify its geometry rather than remove any material. The applied force stresses the metal beyond its yield strength, causing the material to plastically deform, but not to fail. By doing so, the sheet can be bent or stretched into a variety of complex shapes. Sheet metal forming processes include the following:

l Bending

l Roll forming

l Deep Drawing

l Stretch forming

Bending

Bending is a metal forming process in which a force is applied to a piece of sheet metal, causing it to bend at an angle and form the desired shape. A bending operation causes deformation along one axis, but a sequence of several different operations can be performed to create a complex part. Bent parts can be quite small, such as a bracket, such as a large enclosure or chassis.

V bending and Wipe bending

Roll forming

Roll forming, is a metal forming process in which sheet metal is progressively shaped through a series of bending operations. The process is performed on a roll forming line. Each station has a roller, referred to as a roller die, positioned on both sides of the sheet. The shape and size of the roller die may be unique to that station, or several identical roller dies may be used in different positions. The roller dies may be above and below the sheet, along the sides, at an angle, etc. the roller dies are lubricated to reduce friction between the die and the sheet, thus reducing the tool wear. Also, lubricant can allow for a higher production rate, which will also depend on the material thickness, number of roll stations, and radius of each bend. The roll forming line can also include other Sheet Metal Fabrication operations before or after the roll forming, such as punching or shearing.

Deep drawing

Deep drawing is a metal forming process in which sheet metal is stretched into the desired part shape. A tool pushes downward on the sheet metal, forcing it into a die cavity in the shape of the desired part. The tensile forces applied to the sheet cause it to plastically deform into a cup-shaped part. Deep drawn parts are characterized by a depth equal to more than half of the diameter of the part. These parts can have a variety of cross sections with straight, tapered, or even curved walls, but cylindrical or rectangular parts are most common. Deep drawing is most effective with ductile metals, such as aluminum, brass, copper, and mild steel. Examples of parts formed with deep drawing include automotive bodies and fuel tanks, cans, cups, kitchen sinks, and pots and pans

Stretch Forming

Stretch forming is a metal forming process in which a piece of sheet metal is stretched and bent simultaneously over a die in order to form large contoured parts. Stretch forming is performed on a stretch press, in which a piece of sheet metal is securely gripped along its edges by gripping jaws. The gripping jaws are each attached to a carriage that is pulled by pneumatic or hydraulic force to stretch the sheet. The tooling used in this process is a stretch form block, called a form die, which is a solid contoured piece against which the sheet metal will be pressed. The most common stretch presses are oriented vertically, in which the form die rests on a press table that can be raised into the sheet by a hydraulic ram. As the form die is driven into the sheet, which is gripped tightly at its edges, the tensile forces increase and the sheet plastically deforms into a new shape. Horizontal stretch presses mount the form die sideways on a stationary press table, while the gripping jaws pull the sheet horizontally around the form die

Sheet Metal Forming,Sheet Metal Forming Services,Custom Sheet Metal Forming,Precision Sheet Metal Forming

Suzhou FCE precision electronics Co., LTD , https://www.fcesz.com