DS-3WA2-25ACI Hikvision Dual Dual Band Wireless Access Point AP
DS-3WA2-25ACI Hikvision Dual Dual Band Wireless Access Point AP Hikvision Smart Antenna Wireless AP Hikvision High Density Wireless AP Hikvision Wireless AP Agent
DS-3WA2-25ACI
Hikvision dual-channel, dual-band, smart antenna, high-density 11AC series wireless access point AP
DS-3WA2-25ACI Hikvision Dual Dual Frequency Smart Antenna High Density 11AC Series Wireless Access Point AP Product Description:
The DS-3WA2-25ACI is an 802.11ac wireless access point (AP) product launched by Hikvision with an "X-sense" smart antenna. It supports two spatial flow technologies, and 2.4G provides the highest 300Mbps. The access rate, 5G provides the highest access rate of 866.7Mbps. The whole machine provides an access rate of 1.167 Gbps, and gigabit wireless speed makes performance no longer a bottleneck.
The DS-3WA2-25ACI is mainly used in indoor complex environments. It can be used as a thin AP (Fit AP), a wired/wireless integrated switch/wireless controller, or a fat AP. Provide wireless access services for wireless LAN users.
Order model
Product Model Description
DS-3WA2-25ACI indoor wireless access point, smart antenna, support for high-density access, dual-channel dual-frequency, support for 2 spatial streams, the largest access rate of the whole machine is 1167Mbps, 802.11 can be supported a/b/g/n and 802.11ac work at the same time, fat/thin mode switching, WAPI, single-port uplink, PoE and local power supply (PoE and local power adapters must be purchased separately)
Installation Notes
The support can work in both 802.11a/n/ac and 802.11b/g/n modes.
The 2.4GHz branch holds 300Mbps, and the 5G branch holds 866.7Mbps.
Built in the most new "X-sense 3" smart antenna.
Fat and thin integration, centralized management.
The terminal holds the terminal for intelligent identification.
Rich Quality of Service (QoS).
The USB interface can be flexibly connected to the USB network card to easily increase the number of user access.
DS-3WA2-25ACI Hikvision Dual Dual Frequency Smart Antenna High Density 11AC Series Wireless Access Point AP Typical Applications:
DS-3WA2-25ACI Hikvision dual-channel dual-band smart antenna high-density 11AC series wireless access point AP detailed technical parameters:
DS-3WA2-25ACI
Wireless AP/AC
RF design 2.4G: 2 × 2 MIMO, 5G: 2 × 3 MIMO
Transport Protocol 2.4G: 802.11b/g/n, 5G: 802.11a/n/ac
Working frequency band 802.11b/g/n: 2.4G ~ 2.4835GHz
802.11a/n/ac : 5G: 5.150 to 5.350 GHz, 5.47 to 5.725, 5.725 to 5.850 GHz (Note: The operating frequency band varies according to different country configurations)
Antenna Type Built-in the newest smart antenna array with 65,536 antenna combinations and a built-in high-gain smart antenna.
The number of spatial streams is 2 streams. The 2.4G provides the highest access rate of 300Mbps, and the 5G provides the highest access rate of 867Mbps. The whole machine provides an access rate of 1.167Gbp.
Modulation technique OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Receive sensitivity 11b: -99dBm (1Mbps), -93dBm (5.5Mbps), -90dBm (11Mbps)
11a/g: -93dBm (6Mbps), -85dBm (24Mbps), -82dBm (36Mbps), -77dBm (54Mbps)
11n: -92dBm@MCS0, -74dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15
11ac HT20: -90dBm (MCS0), -65dBm (MCS8)
11ac HT40: -85dBm (MCS0), -60dBm (MCS9)
11ac HT80: -82dBm (MCS0), -58dBm (MCS9)
The largest transmission power is 23dBm (the actual transmission power varies according to different national and regional regulations)
Adjustable power granularity 1dBm
Dimensions 205mm × 205mm × 42mm (height is the height of the host edge, without shape and hanger)
Weight 0.8kg
Service port 1 10/100/1000Base-T Ethernet port (with PoE receiving power)
1 10/100/1000Base-T Ethernet port
1 USB2.0 interface (supports extended USB network card or USB storage)
Management port 1 RJ45 form console port.
Status indicator Single indicator (red, green, blue, orange and flashing mode, terminal access to breathing flash mode, silence can be turned off)
Power supply mode Local power supply, DC 48V; (Note: power adapter is optional)
Supported by PoE Power over Ethernet (supported by 802.3af/802.3at compatible)
The power of the whole machine is the largest 12.95W
Environment Operating temperature: -10 ° C ~ 55 ° C
Storage temperature: -40 ° C ~ 70 ° C
Working humidity: 5% to 95% (no condensation)
Storage humidity: 5% to 95% (no condensation)
Installation method Wall-mounted, ceiling protection IP41
Safety regulations GB4943, IEC 60950-1
EMC regulations GB9254, EN301 489, EN50155: EN50121
Mechanical vibration IEC61373
RF regulations Wireless transmitter equipment type approval, EN300 328, EN301 893
MTBF >400000H
DS-3WA2-25ACI Hikvision Dual Dual Band Wireless Access Point AP Hikvision Smart Antenna Wireless AP Hikvision High Density Wireless AP Hikvision Wireless AP Agent
CNC turning is a subtractive manufacturing process in which pieces of material are rotated as a machine tool is fed to the piece, removing material to create a finished piece. It is primarily used to manufacture parts that are cylindrical in nature. We supply custom cnc turning service and CNC turning parts manufacturing
What is CNC TURNING?
Items processed by a lathe will be cylindrical and must be on-centre. Turned parts can range from simple rings to complex curved components. CNC turning is the most efficient way to mass-produce these kinds of parts.
Various cutting tools can be installed within the lathe tooling head to perform different cutting operations sequentially, to produce parts in a one-pass process. Straight cuts, tapers and contours can all be created by varying the angle and depth of the cut.
RongNa CNC Turning system is capable of cutting and holding different types of materials with complete accuracy and efficiency. CNC Turning to manufacture anything from furniture to garden tools to intricate machines and parts for cars and trucks etc.
We are professional CNC Turning Service company and custom CNC Turning Parts manufacturers in China, Our CNC Turning Center help with all kinds of projects and makes cuts of any work piece by changing the angle, the material and the type of cutting tool being used.
Cnc Turning,Cnc Turning service,Cnc Turning Parts,Cnc Turning Services
Ningbo Rongna Technology Co.,Ltd , https://www.machiningcustom.com