Dongfeng Duolika 18-meter Aerial Platform Technical Performance Parameters List and Quote
High-altitude Truck Features
This product is equipped with operating devices in the operation bucket and rotary seat , remote control engine start / stop, high speed / low speed, the use of electro-hydraulic proportional valve control arm movement, good stability, the working arm can be left and right 360 ° Continuous rotation, automatically maintain the working tank level by the linkage mechanism, the main pump can be operated when the failure of emergency pump down operation, with night lighting, lifting heavy objects. Products are widely used in power, street lamps, municipal, gardens, communications, airports, construction (repair) ships, transportation, advertising, photography and other high-altitude operations.
New full hydraulic self-propelled chassis
Developed a self-propelled aerial work platform truck with completely independent intellectual property rights, using electromechanical-hydraulic integration, reliability design, and computer-aided design technologies, successfully developed a fully hydraulically driven, self-propelled special chassis that broke through. In the past, domestic high-altitude lifting platform trucks could only be limited by the design of the vehicle or crane chassis modifications.
Running with load, good job stability
The chassis structure breaks through traditional design theories and methods, and reduces the center of gravity offset by optimizing the overall layout and load distribution of the platform. Using a unique large-angle back-up hinge structure, a variety of counterweight modules are properly set to effectively balance the working torque. Adopting the H -type variable cross-section composite box girder frame and high-load solid rubber tires, the overall stiffness of the chassis is increased, the stability of the whole machine running and working process is ensured, and the function of the high-altitude operation platform vehicle to carry the load is realized.
Multifunctional, versatile working device
Through the boom front end bracket, a lifting device or a passenger platform can be quickly installed to realize functions such as material lifting, hoisting and hoisting, and manned aerial work, and at the same time, an interface is provided for rapid switching of the extension work device and various work devices. .
Unique three-dimensional rotating lifting device
The designed three-dimensional rotating lifting device can not only automatically maintain the attitude of the lifted material, but also can achieve the adjustment requirements of lifting material at any height, any position and any direction in the space. The speed control is precise and sensitive, and the micro-motion performance is good. Satisfy the requirements for the installation of aerial work and ventilation ducts in large caverns.
High-lift truck operation specification
Chapter One total then
The hydraulically-powered manned aerial vehicles are contemporary advanced species mechanical equipment. The construction workers use the aerial vehicles to lift off the work. As long as they are used correctly, safety is guaranteed. However, it is not a proper operation or security measures have not been implemented. It is also a very dangerous work-at-height operation. The following rules of conduct have been formulated.
Chapter two Row car
1. Motorists must hold a bus driving license.
2 , auxiliary transmission must be separated from the hydraulic pump.
3. Pay attention to the height of bridges and tunnels.
4 , the speed is generally not more than 30 km / h, the suburb does not exceed 40 km / h.
5 , the operation bucket (platform) declined to stay in the staff.
third chapter Make industry
1. The choice of parking position should be a solid ground, the inclination of the vehicle should not exceed 3° , and the warning light should be turned on.
2 , working height and wind power
　 Suitable for winds of 6 or below and below 10 meters in height ; for winds up to 5 in height, below 11 to 20 meters in height ;
　 Wind 4 and below suitable height 21 to 30 meters below the operation.
3 , start the oil pump, step on the clutch of the car, pull on the handbrake, and the gearbox hangs the neutral gear, and pull the hydraulic oil pump clutch lever to make the hydraulic oil
The pump is working.
4. After the hydraulic oil pump runs for 2~5 minutes, it can operate the handles of each movement.
5 , the operation of aerial vehicles, should be trained and hold personnel responsible for operational licenses.
6. The operators must concentrate on the prevention of misoperation and strict operation of alcohol prohibition.
7 , first put down the legs, if necessary, put the pad under the leg of the leg to ensure that the vehicle is in a horizontal state.
8. When operating the handle, it should be steady, and do not swift and swift in order to avoid the inertial swing of the working arm and the accident.
9. Operate in strict accordance with the technical parameters and operating ranges specified by the equipment.
10 , the work bucket (platform) on the staff to fasten the seat belts.
11. When lifting the work bucket (platform), the upper and lower arms should be alternately operated to ensure that the bucket (platform) is in the best radius of increase. It is forbidden to use the arm for other purposes.
12. During operation, the operator should pay attention to the safety distance between the bucket (platform ) arm and the high and low voltage wires, telephone lines and buildings, big trees, billboards, lighting and other objects.
13. The on-duty driver is responsible for the ground and pay attention to the safety protection of the traffic.
14. In addition to setting up safety signs and guardrails for working vehicles with a working height of 25 meters or more, ground guardians must also set up 1-2 people to strengthen guardianship in addition to the driver .
15. In the course of work, if abnormal pressure or sudden oil leakage is found in the hydraulic system, work should be stopped immediately. Only after inspection or repair can the work be continued.
16. When the hydraulic system fails and the working arm is unable to move, it should try to make the workers on the operation bucket (platform) evacuation safely and notify the professional maintenance personnel to handle it.
17. After the operation is completed, the operation bucket (platform), the arm is reset, the legs are removed, and the hydraulic pump is disengaged, and the hand brake is released to start the driving.
Chapter Four its it
1 ã€Working buckets (platforms) for high-altitude operations shall have reflective safety signs on the arms and legs.
2, aerial vehicles should be equipped with a triangular (tires) two skids and skid legs 4, the device should board level flag.
3. The most common aerial vehicles currently on the market include: Dongfeng Aerial Vehicles, Liberation Aerial Vehicles, Ao Ling Aerial Work Vehicles,
Qingling aerial vehicles, Jiangling aerial vehicles, JAC aerial vehicles.
The use of aerial vehicles:
Mainly used in electricity, communications, street lamps, traffic police, highways, cable television, ship repair, construction, gardens, advertising, photography, large enterprises and other industries.
Triethyl Phosphate,Triethyl Phosphate Uses,Tep Triethyl Phosphate,Triethyl Phosphate Boiling Point
zhangjiagang xinya chemical co.,ltd , https://www.xinya-chemical.com