Constant Temperature and Humidity Tensile Testing Chamber (YT2-128-20M)
Model NO.: YT2-128-20M
Loading Method: Dynamic Load
Display: Computer Display Mode
Control: Computer Control
Weight: 100-500Kg
Power Source: AC220V
Oil Cylinder Position: None
Temperature Range: -40 C ~ 150 C (Can Be Customized)
Humidity: 20% to 98% Rh 0.1% Rh
Strength Resolution: 1 / 500,000
Strength Precision: 0.3%
Stroke Resolution: 1 / 500,000
Display Accuracy: 0.1 C
Temperature Accuracy: +/-1c
Test Distance: 650mm
Test Width: 400mm
Temperature Control: Pid Automatic Calculation, Stability Error
Trademark: Yuelian
Transport Package: Export Standard Plywood Box
Specification: ATSM, GB, CE, SGS, TUV
Origin: China
HS Code: 9031809090
Model NO.: YT2-128-20M
Loading Method: Dynamic Load
Display: Computer Display Mode
Control: Computer Control
Weight: 100-500Kg
Power Source: AC220V
Oil Cylinder Position: None
Temperature Range: -40 C ~ 150 C (Can Be Customized)
Humidity: 20% to 98% Rh 0.1% Rh
Strength Resolution: 1 / 500,000
Strength Precision: 0.3%
Stroke Resolution: 1 / 500,000
Display Accuracy: 0.1 C
Temperature Accuracy: +/-1c
Test Distance: 650mm
Test Width: 400mm
Temperature Control: Pid Automatic Calculation, Stability Error
Trademark: Yuelian
Transport Package: Export Standard Plywood Box
Specification: ATSM, GB, CE, SGS, TUV
Origin: China
HS Code: 9031809090
High and Low Temperature Testing Chamber (YT2-128-40M)
1.Aplication
This high/low temperature chamber is used to couple with the proper tensile strength tester for testing the tensile, elongation and peeling strength of specimen under high or low temperature environment.
2.Purpose:
This tester  is designed as improved model for environment testing, installation high and low temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance. Can remove the chamber to increase use space and bring convenience when using room temperature tests.
3.Software Function:
Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; Can conduct tensile, compression, bending, shearing, tearing and peeling test; Use PC and  interface board for data collection, preservation, processing and printing test result; Can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; Can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.
4.Sepcification:
Capacity selection | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN (optional dual capacity) |
Temperature range | '-40 ºC ~ 150 ºC (Can be customized) |
Humidity | 20% to 98% RH 0.1% RH |
Display | Computer display mode |
Strength resolution | 1 / 500,000 |
Strength precision | 0.3% |
Stroke resolution | 1 / 500,000 |
Control method | Rally machine full computer operation or display mode of operation |
Temperature control | PID automatic calculation, stability error |
Display accuracy | 0.1°C |
Temperature accuracy | ±1ºC |
Test distance | 650mm |
Test width | 400mm |
Test chamber space | 40 × 80 × 40cm (W × D × H) |
Controller function | Programmable controller, Chinese and English switch, touch color screen, 120 groups of program memory, 1200 programming, program cycle 999 times, part of the group, each group of 99 times, time setting 0-99H59M / section, Line monitoring programming |
Circulatory system | Fan forced circulation system |
Humidity stability | ±2.5%RH |
Humidification system | Surface evaporation, humidifier with water and overheating protection. |
Dehumidification system | Frozen latent heat dehumidification method. |
Heating system | SUS304 stainless steel heat dissipation heater |
Cooling system | Fan cooling, high efficiency compressor, environmentally friendly refrigerant. |
Protective device | Leakage and overload protection, compressor over protector, humidifier overheating protection, temperature limit protection device |
Chamber material | SUS # 304 stainless steel |
Test speed | 0.01 ~ 500mm / min computer settings, with fixture up and down fast adjustment button |
Force unit conversion | Kgf, N, Ibf, g, ton, Mpa |
Stop mode | Overload stop, emergency stop button, specimen failure automatic shutdown, upper and lower limits set automatic shutdown, automatic reset function |
Size | 130 × 230 × 280cm (W × D × H) |
Motor | Servo motor drive, synchronous wheel and precision ball screw drive |
Standard configuration | Fixture extension rod, Cooling device, a set of fixture, software, USB computer connection |
Power | 400W |
Machine weight | About 450kg |
Volt | 220V 50 / 60HZ 30A |
Option | Personal computer |
High and Low Temperature Testing Chamber (YT2-128-40M)
1.Aplication
This high/low temperature chamber is used to couple with the proper tensile strength tester for testing the tensile, elongation and peeling strength of specimen under high or low temperature environment.
2.Purpose:
This tester  is designed as improved model for environment testing, installation high and low temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical performance. Can remove the chamber to increase use space and bring convenience when using room temperature tests.
3.Software Function:
Test & Control System is designed for PC Electronic Universal Testing Machines, PC Hydraulic Universal Testing Machines and PC Compression testers; Can conduct tensile, compression, bending, shearing, tearing and peeling test; Use PC and  interface board for data collection, preservation, processing and printing test result; Can calculate max force, yield strength, average peeling force, max deformation, yield point, elastic modulus and other parameters; Can conduct curve graphics processing, multi-sensor support, video and image interface, flexible data processing, MS-ACCESS database support, making more powerful function of system.
4.Sepcification:
Capacity selection | 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN (optional dual capacity) |
Temperature range | '-40 ºC ~ 150 ºC (Can be customized) |
Humidity | 20% to 98% RH 0.1% RH |
Display | Computer display mode |
Strength resolution | 1 / 500,000 |
Strength precision | 0.3% |
Stroke resolution | 1 / 500,000 |
Control method | Rally machine full computer operation or display mode of operation |
Temperature control | PID automatic calculation, stability error |
Display accuracy | 0.1°C |
Temperature accuracy | ±1ºC |
Test distance | 650mm |
Test width | 400mm |
Test chamber space | 40 × 80 × 40cm (W × D × H) |
Controller function | Programmable controller, Chinese and English switch, touch color screen, 120 groups of program memory, 1200 programming, program cycle 999 times, part of the group, each group of 99 times, time setting 0-99H59M / section, Line monitoring programming |
Circulatory system | Fan forced circulation system |
Humidity stability | ±2.5%RH |
Humidification system | Surface evaporation, humidifier with water and overheating protection. |
Dehumidification system | Frozen latent heat dehumidification method. |
Heating system | SUS304 stainless steel heat dissipation heater |
Cooling system | Fan cooling, high efficiency compressor, environmentally friendly refrigerant. |
Protective device | Leakage and overload protection, compressor over protector, humidifier overheating protection, temperature limit protection device |
Chamber material | SUS # 304 stainless steel |
Test speed | 0.01 ~ 500mm / min computer settings, with fixture up and down fast adjustment button |
Force unit conversion | Kgf, N, Ibf, g, ton, Mpa |
Stop mode | Overload stop, emergency stop button, specimen failure automatic shutdown, upper and lower limits set automatic shutdown, automatic reset function |
Size | 130 × 230 × 280cm (W × D × H) |
Motor | Servo motor drive, synchronous wheel and precision ball screw drive |
Standard configuration | Fixture extension rod, Cooling device, a set of fixture, software, USB computer connection |
Power | 400W |
Machine weight | About 450kg |
Volt | 220V 50 / 60HZ 30A |
Option | Personal computer |
Rubber Prototype Parts,Rubber Prototype Plastic Parts, Customized Rubber Prototype service,Soft Rubber Prototype Products
Ningbo Jiongke Technology Co., Ltd , https://www.precisioncncmachiningparts.com