5 Liters Lab Vacuum Short Path Distillation
Short path evaporators from laboratory to production scale in sizes ranging from 0.04 - to 80 m² and for operating temperatures up to 400 °C.
Short path distillation is a special type of thin film distillation technology, at which even lower working pressures and therefore even lower boiling temperatures can be achieved.
Design
Different from the traditional wiped film evaporator design, the condenser is located inside the short path evaporator body.
Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
Particular features
Continuous distillation process.
Very low operating pressures up to 0.1Pa (100Pa=1mba). (The considerably lower pressure in the short path evaporator is obtained by the short distance for the vapours on their way from the evaporator surface to the condenser. )
The very low operating pressures ensure very low distillation temperatures and therefore a very gentle distillation is possible.
Short residence time. (Thanks to the short residence time, the low evaporation temperature and the immediate cooling of the concentrate, thermal stress and decomposition of the product can be minimized.)
High evaporation rates.
Fields of application
For the thermal separation of high molecular and high-boiling products.
For heat sensitive materials.
| Model | HSPD-5 | HSPD-10 Â | HSPD-20 Â Â | HSPD-50 Â | HSPD-100 Â | HSPD-200 | |||
| Rotary Flask (L) | 5L | 10L | 20L | 50L | 100L | 200L | |||
| Evaporator heat transfer area(m2) |
0.058 Â | 0.12 | 0.24 Â | Â Â 0.5 Â | 1.0 | Â 2.0Â | |||
| Heating method |
Ceramic electric heating units, MAX TEMP:260ºC Electric Oil heater ,MAX TEMP:200ºC |
||||||||
| Vacuum pressure |
0.1-2000Pa, According to the actual vacuum system configuration. |
||||||||
| Condensati on transfer area (m2) |
0.086 Â | 0.20 Â | 0.42 Â | 1.1 Â | 2 | Â 4 | |||
| Theoretical evaporation (L/H) |
0.8~ 1.5 |
5~6 Â | 10~12 Â | 25~30 Â | 50~60 | 100~120 | |||
| Occupying space (L*W*H) (m) |
1.1*0.5*1.7 | 1.1*0.8*1. 7 |
1.5*1.2*2. 5 |
2.0*1.5*3. 0 |
2.0*1.5*3.5 | 2.5*2.0*4.0 | |||
Package&Shipping
A. Sufficient inner protection with differen materials, including bubble bag, foam board and others.
B. Qualified wooden packge or carton for different products or as customer require
C. Strict packing process to ensure the safety and completeness of the goods
FAQ
1.Could you do design for us?
yes, we can do artwork including printing, logo etc. for you, if you provide us the content and tell us where to put,just tell us how to do in detail.Â
2.How can we place order?Â
After we made agreement on the products and price, we will make Proforma Invoice for your confirmation.When we got your payment (deposit) we will prepare for the goods and sending within 5 working days generally. If you have your own ship forwarder, we will use your ship forwarder to delivery goods. If you don't have ship forwarder, then when the goods arrived at Destination port, you must find a ship forwarder to h elp you clear the custom.
3.What's your payment term?
100% T/T in advance.Western Union. Small amount payment can through Paypal or Escrow. please confirm everything clearly before you make payment.
4.How about the shipping?
For small orders, we will send the goods by International Express like FEDEX, DHL, TNT or UPS. usually it takes 3-7work days to arrive.If big quantity we will ship by Ocean transportation, it takes one month to arrive. If urgent, you can select shipping by Air, but freight charge will be more expensive.
5.what's your products' advantages ?
A. Good quality and competitive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assembling,packing and shipping.
D. After-sale services, if there is quality problem, we will offer you replacement for defective quantity.
6.Which brands you already cooperated with in the past ?
We have already cooperated with so many chemical plants, pharmaceutical factories and so on in our country for more than 3 years. In the foreign markets, we have cooperated with more than 50 wholesalers, also the ultimate users. They are all satisfied with our products' quality.
Send your Inquiry Details in the Below, Click "Send" Now! Specific information and Accurate quotation
 are waiting for you.
The performance characteristics of the HDPE winding structure wall tube are as follows:
1. The hot state of winding forming welding joint quality is high.The flat material belt and U-shaped material belt extruded from the mouth die of the extruder in the melting state are evenly wound on the heated roller die according to the predetermined position, which ensures the quality of the fusion joint of the structure wall tube. In particular, in the structural design, the melt joint of the flat material belt is covered by a polyethylene-coated supporting tube, which improves the overall resistance to the external pressure of the product.
2. Good connection quality.
The pipe connection with excellent installation performance adopts the
embedded electric fuse in the socket with the same material socket welding
connection technology. It can achieve zero leakage, ensuring the same life span of the pipeline system and the safety of operation. At the same time, because the product under the condition of the same application as other tubes light weight, and is easy to transport, construction is convenient and quick, and can reduce the construction cost, in the range of applications, without a concrete cushion layer and concrete jaasiel groove can directly apply the tube after qualified, basically, stay do under excavation, side tube, while backfilling, simplifies the construction procedures, shortening the time limit for a project. During the project acceptance, the closed-air test is used instead of the closed-water test, which not only speeds up the acceptance but also saves the complicated work and a lot of test costs in the closed-water test
3. Good flexibility
High-density polyethylene winding structural wall pipe has macro flexibility, and the micro pipe section has strong rigidity and overall resistance to external pressure.
when used under heavy load road surfaces, it can ensure the safety of traffic. Due tothe flexibility of the pipe, it can also reduce the damage loss of the pipe to the minimum in the event of an earthquake, uneven surface settlement, and other geological activities. These characteristics improve the seismic mitigation ability of public facilities.
4. HDPE can be recycled, The main raw material of winding structure wall pipe
is green environmental protection products, such as high-density polypropylene, which doesn`t have any toxicity. There is no dye in the production process. The used pipeline can be 100% recycled. It is a green product of environmental protection.
5. Corrosion resistance, aging resistance, and service life span can be up to 50
years.
High-density polyethylene has the ability to resist chemical corrosion and
erosion. Therefore, when the winding structure wall pipe is conveying corrosive fluid or laying in corrosive soil, it does not need anti-corrosion treatment, and its performance is much better than other pipes. The product in the design process, chooses a reasonable product structure form, to ensure the service life span of the plastic pipe is more than 50 years, and no maintenance is needed in the life span.
6. Tube inner wall roughness, large water transfer around the structure of the
wall tube. Product inner wall roughness N is about 0.010, so the transmission of fluid has lower friction, compared to other products such as cement pipe with a similar diameter the water transfer is greatly improved. Therefore, the smaller HDPE tube can replace the larger cement pipes. In application, under the same conditions, using a wall pipe winding structure can have better reliability compared to the traditional pipe material. The comprehensive benefit is obvious, especially in the narrow construction site, high building density, underground pipeline, complicated traffic busy roads, and acid soil.
Winding Structured Wall Pipe,Large Diameter Plastic Krah Pipe,Structure Wall Plastic Krah Pipe,Winding Structure Wall Plastic Krah Pipe
Hebei Taiwo Plastic Pipe Co.,Ltd , https://www.taiwocarattube.com