3 tons of fire sprinklers use what are the precautions

The 3- ton fire sprinkler is a relatively large-scale machine. To prevent damage to the machine and increase the efficiency of the machine, we must use it after understanding the use of the machine, so that we can achieve a multiplier effect. So what are the precautions for using a 3-ton fire engine?

3吨消防洒水车

   When the fire hydrant in the fire sprinkler is used to fill water, the fire hydrant supply pressure must meet the demand of the fire engine. It is best to select natural water sources during the selection of water sources, but when using river ditch or pond water sources, it is necessary to pay attention to putting all the suction pipes inside the fire sprinkler into the water while avoiding suction pipes to inhale stones or debris. Wait, otherwise it will cause damage to the equipment. Generally, a suction device is installed inside the suction pipe. During the water absorption, the filter device should not be taken out. Water can not be selected where the water level is shallow, and water can not enter the suction pipe during water absorption so as to avoid interruption of water absorption.

 

   Fire sprinklers are relatively low in the number of devices for rinsing water. To prevent equipment damage, be careful to avoid obstacles during operation. When using a fire sprinkler to eliminate a fire, after entering the fire site, it must be in accordance with the requirements of the command to enter the designated position to park the vehicle, so as to be able to flexibly attack the fire. After entering the fire, the engine must always be in operation. In order to prevent combatants from harming due to the reaction force of the water gun, the fire sprinkler must gradually increase the water pressure when it starts to supply water.

 

   Because fire sprinklers have the function of fire fighting, they need to be filled with liquid at any time, but the low temperature in winter is relatively low, because there is water and sometimes the temperature of the equipment will be even below zero. At this time, we must pay attention to shutting off the water tank and fire. Pump ball valve. At the same time also need to open the fire pump, power take-off, fire cannons and fire hose discharge valve, remove the residual moisture inside the pipe, so as not to freeze the device.


Leisuwash 360 Mini Touch Free Car Wash

Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment.

Leisuwash 360 mini touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.

Leisuwash 360 mini Automatic Car Wash Machine provide lower investment for car wash owners in order to deliver a better return on investment, specially designed for the car wash bays with limited sizes, suitable for car service station, petrol station, Auto dealers, 4S shop etc. Completely system include under chassis wash system, pre-soak application system, high pressure wash system, overglow Hi-gloss system, wax application system, chemical mixing system, intergrated air drying system, mounting frames.

Touchfree Car Wash,Leisuwash 360 Mini,Car Wash Systems,Leisure Touchless Car Wash

Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdautomaticcarwash.com