What to pay attention to when opening the scale scale body

Scales, I believe that most companies are not rusty, commonly used in ports, warehousing, workshops, freight yard, its superior features and long-term stability, reliability, not only improve the efficiency of industrial and mining enterprises in and out of commercial settlement of materials, and can Deepening the monitoring of the production process and the comprehensive data system governance of the company, meeting the requirements of modern weighing management.

The scales are opened and the whole process is listed as follows:

The first step is to first loosen the signal line of each load cell of the weighing scale from the junction box and record the response. In the future, the device should be installed on the original position of the junction box. The signal line must not be cut off. Then the main line is also closed.

The second step: disassemble the connecting screws between the two scale bodies, there are longitudinal and transverse.

The third step: pick up the steel balls under the scale body, steel balls and steel pads and respond to thin iron gaskets.

In the process of lifting and transportation, pay attention to the sensor signal line with a good response to prevent crushing and pressure breaking. The load cell should be prevented from chaos during the disassembly and lifting process.

Do a good job in the above steps, the task of dismantling the ground scales is considered to pass the completion of the task, can not save the map, save the sensor signal line full shear, and other improper handling, if such disposal will bring about for the future use of weighing Big trouble. As soon as it rains, the junction of the signal line will go wrong if it enters the water.

Hygienic Material Cast Film Machine

Specifications and models Environmentally friendly film casting production line
Film Structure 357
Screw aspect ratio 32: 132:132:1
Screw direct 75:125:7575:75:90:75:7575:65:75:65:75:65:75
Mold width 250025002500
Finished product width 220022002200
Finished product thickness 0.03mm-0. 2mm0.03mm-0.2mm0.03mm-0.2mm
Maximum extrusion capacity 10 tons/24 hours 10 tons/24 hours 10 tons/24 hours
Mechanical design line speed 160160160
Total power 350KW365KW380KW
Environmental protection film casting production line
Mainly used in the production of biodegradable cast film products
PLA biodegradable cast film can be quickly and naturally decomposed under certain conditions, which is an inevitable trend in the future development of flexible packaging and is widely used as printing materials.
Materials, packaging materials, food daily chemical soft packaging materials, biodegradable coated paper, clothing packaging, etc.
1 PLA is a polymer composed of small lactic acid units (polylactic acid). Lactic acid is an organic acid that plays an important role in our daily life. we flat
The yogurt or anything with glucose can be converted into lactic acid, and the lactic acid of PLA consumables comes from corn, and the starch raw material extracted from corn
material made.
|The degradable film not only has the functions and characteristics of traditional plastics, but also can pass through the action of microorganisms in soil and water or through
The role of ultraviolet rays in the sun, split and degrade in the natural environment, and then re-enter the ecological environment in a reduced form, returning to nature. Domestic research
The varieties developed have covered photodegradation, photobiodegradation, photooxidative biodegradation, high starch content biodegradation, high calcium carbonate filled photooxidative degradation,
Fully biodegradable, etc. Among them, edible film and water-soluble film are more commonly used.

Hygienic Material Cast Film Machine,Cast Film Extruder Machine,Cpp Cast Film Line,Pp Cast Film Machine

Baijia Mechanical Equipment (Huizhou) Co., Ltd. , https://www.castfilmmachine.com