What are the reasons for the failure of a single column vertical lathe?
Single-column vertical lathes, which have some problems with their failures, are also an aspect of what we need to learn and an important knowledge point. So today, Xiao Bian has set out to carry out a detailed example of its two failure problems so that everyone can learn something from them that helps them. In this way, they can become more familiar with the single column vertical lathe. Lathes.
Failure problem 1: Single-column vertical lathe can not speed the emergence of this problem, the root cause, it may be locked rod limit switch problems, or mechanical problems, there may be oil pressure problems.
Problem two: Single-column vertical lathes have single-column vertical lathes with outer-diameter shocks. The specific causes are:
One reason: The tool becomes blunt, not sharp, or the tool bar is extended too long.
Cause two: The axis clearance is too large or too small.
The reason is three: There is a problem with the Spindle Bearing, or the center frame is not adjusted properly.
Failure problem 1: Single-column vertical lathe can not speed the emergence of this problem, the root cause, it may be locked rod limit switch problems, or mechanical problems, there may be oil pressure problems.
Problem two: Single-column vertical lathes have single-column vertical lathes with outer-diameter shocks. The specific causes are:
One reason: The tool becomes blunt, not sharp, or the tool bar is extended too long.
Cause two: The axis clearance is too large or too small.
The reason is three: There is a problem with the Spindle Bearing, or the center frame is not adjusted properly.
Tension bearings used in automotive engine belt pulley tensioning mechanism, and manufactured with tri-lip type seal structure, high temperature resistant rubber seals, fully synthetic special grease, and high-quality bearings steel, which are characterized by high temperature, high limiting speed and long life, Suitable for automobile engines that contact with water vapor, dust, mud, and work with heat, cold or other complex conditions.
Tensioner Bearings,Tensioner Pulley Bearings,Belt Tensioner Pulley Bearing,Pulley Bearings
ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com