Golf electric sightseeing car
Golf originated in Scotland in the fifteenth century or earlier. Nowadays, more and more people choose leisure and entertainment.
The venue of golf is very different from other sports, so golf goes to the electric sightseeing car in the stadium and becomes the most important mobile tool for people. You may encounter some common problems with sightseeing cars on the stadium. After reading this article, you will understand the common problems and analysis of sightseeing cars.
In the use of golf sightseeing vehicles, there is sometimes a dilemma of no electricity, which will directly lead to the vehicle can not ignite. Under normal circumstances, the battery is charged at night, and the average charging time is about 8 hours. During the day, the battery should be used by consumers in a saturated state. In addition, the charging time is not as long as possible. Many people may think that long-term charging can make the sightseeing car use longer. In fact, this is not the case. The staff needs to carry out necessary charging according to the actual situation to avoid harmful charging. . Speaking of charging, there may be a phenomenon that the charger cannot charge the battery. First, check whether the charger matches the battery and do not charge blindly. After that, check if the charger is damaged and the cable is broken. If it is a problem with the charging device, replace the charger and charger cable. If not, check if the charging voltage meets the requirements.
In addition, there may be reasons such as the steering wheel cannot be turned, the vehicle cannot move forward or backward, the brake malfunctions, and the like. The reason why the steering wheel cannot be turned may be that the steering wheel or vertical shaft is short of oil. Just add oil to the steering wheel and the vertical shaft. If it is encountered in the vehicle can not move forward or backward, you can check the line for poor contact or damage. The phenomenon of brake failure is not common. If you really encounter such problems may be due to improper adjustment of the brake pads or damage to the brake master cylinder, then you can readjust the brake pads and replace the master cylinder. There are corresponding solutions to such problems. If you really can't solve the problem of the vehicle, you can look for the management office to help solve the problem.
According to regulations, live birds reception should be at the wind down area of the processing plant. Including parking area, slaughtering-waiting area, unloading ,live birds hanging, stunning and bleeding area, crates cleaning, crate pelleting,vehicle disinfection area,waste store ,reception and urgent killing area and so on. The slaughterhouse is appropriate to single layer, net height is not less than 4.2 meter, the polar space not less than 6 meter, hanging area is the main workshop bleeding room design to be darkroom which separate with our working area.Close to one side to receiving area is to be working area, including clearing room, official quarantine room, if have halal products, should with one rest room for Iman.
1.Live poultry vehicles should have special road. There is a disinfection pool which same wide as door at the entrance for live poultry enter..The pool size is about 3 meters long and 100 to 150mm deep.
2. UnloadingThe platform built which height is same as vehicles which save much labor. Two workers unloading crates from vehicle,each time unload 8 to 9 layer of crate, each hour unloading 12000birds. Normally unloading platform should be keep some crates. According to WSPA regulations, when live birds reach slaughterhouse should be killed within 1hour,max. Not more than 2 hours, for one slaughterhouse which to slaughter 12000birds/H, the parking place should be suitable for 5 trucks, unloading area is suitable for 2 trucks, crates pelleting area is suitable for 3 trucks, and with spare crates storage room to keep spare crates.
3. Live birding hangingThere should be a darkroom after birds hanging and stunning, the orbit of overhead conveyor line should be kept level,straight ,try to reduce the turns and movements; The overhead conveyor line with synchronous control system and emergency stop system to ensure the reliable running of the processing line. The appropriate shackles are used according to different type of poultry and raising period; Try to keep poultry appease to prevent wings injury from struggling to ensure meat quality.
Live Bird Receiving Unit, Chicken Hanging Unit, Live Bird Reception, Chicken Reception
Connect Group For Poultry Project , https://www.connectpoultry.com