Us Technology Waste/Scrap/Used Metal Recycling Machine with Siemens Motor
Shredwell metal hammer mill is aggressively size reduce and densify preshredded
material whilst liberating the various different fractions and allowing for better separations and reduced transport costs.It contains a horizontal rotating shaft which hammers are mounted.The hammers are free to swing on the ends of the cross, or fixed to the central rotor.The rotor of metal crusher is spun at a high speed inside the drum while material is fed into a feed hopper.The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size.Then metal crusher create a product which is both clean and of high bulk density suitable for transportation.
Typical Application:
Electronic Scrap -Â WEEE Directive Materials
Steel Scrap -Â Various metal scrap, metal drum, paint bucket, gasoline drum, bicycle, color steel tile, steel sheet etc
Aluminum -Â Castings, Profiles, UBC's etc.
ELV's (End of Life Vehicles) -Â Pre-shredded vehicle bodies
SLF (Shredder Light Fraction), ASR (Auto Shredder Residue)
Main Features
Strong welded construction from heavy gauge, wear resistance steel plate.
Durable, wear resistant, replaceable hammers, milling rings and chamber liners in metal crusher
Oversized, spherical rotor bearings with seal protection-prevents bearing damage due to product migration
Stable boot ,low noise,foundation installation
Adjustable product size control
Replaceable wear plates in the chamber of scrap metal drum crusher
Hydraulic open top system to speed up service and maintenance requirement and reduce down time
Stand Alone Electrical Control Panel -Â using quality Schneider(Telemecanique) components and Siemens PLC's Tested, Approved and Certified to the applicable CE safety standards
1.Technical Specification
Â
Metal shredder | HS1280 | HS1210 | HS1214 | HS1680 | HS1690 | HS1614 | HS1815 |
Motor | Siemens | Siemens | Siemens | Siemens | Siemens | Siemens | Siemens |
Power (Kw) | 75-132 | 110-200 | 200-315 | 132-200 | 260-400 | 315-500 | 400-500 |
Voltage | As per request | As per request | As per request | As per request | As per request | As per request | As per request |
Infeeding size (mm) | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 |
Output size (mm) | 20-120 | 20-120 | 20-120 | 40-120 | 50-200 | 50-200 | 50-200 |
Capacity (t/h) | 2-3 | 3-5 | 4-6 | 3-5 | 5-8 | 6-10 | 8-12 |
2.Service
Pre-sale support
*Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.
*On-site inspection
After-sale service
*Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.
*Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request.This will enable customers to optimize the performance of their new plant.Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technician.Dimensional drawings together with service requirements will be provided prior to delivery of the equipment, which make time for our customer to prepare the site and commence production in time.
Technical support
*Shredwell provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
3.Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery.Our equipment is based on self-owned intellectual property and has advanced European and American technology.
Shredwell has now been in the shredding and recycling industry for more than 10years.Our engineering team has around 15 years experience in designing and manufacturing shredding and recycling systems for scrap tires,scrap metal,waste wood,plastic...Our workforce has more than 5 years experience in manufacturing shredding machinery.Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers.Our main focus is to provide our customers cost-effective tire recycling system, metal recycling system, e-waste recycling system, solid waste recycling system etc.
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop.Our mission is to provide our customers the best recycling solutions with high quality service and technology.
4. FAQ for metal recycling machine
1)  Are you a factory or trade company?
We are professional recycling shredder factory with the modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.  Export proportion around 50%. .
2) How can IÂ trust your company?
a. modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
b. famous brand component as our standard configuration, like Siemens Motor, Tongli or SEW reducer, Siemens PLC and Schneider component. All parts processing by CNC machining to warranty the precision.
b. Assessed by third party-national test centre. national patents for all equipment, also CE, ISO.
c. Welcome to inspect anytime. We are near to Shanghai airport.
d. About the machine, we do much better on:Wear plates, seals, structure design, pressure head.
3) How about the test running &Â installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping out your machines, we will invite you to come to test your machines, when you are satisfied; we start to pack and delivery.
We will send our enginner team(At least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, and commission as well as training your workers.
4) Any warranty?
Under the proper usage, 1-3 year for whole machine.
5)Â Â Is your price competitive?
Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.
5. Contact Detail:Â
Mary yang |Â Senior sales concultant
Phone: +86-18351587733
Welcome to contact us at any time We will reply you within 24 hours
Your's recycling expert: Metal recycling machine supplier---Shredwell recycling US technology waste/scrap/used metal recycling machine with Siemens motor
Shredwell metal hammer mill is aggressively size reduce and densify preshredded
material whilst liberating the various different fractions and allowing for better separations and reduced transport costs.It contains a horizontal rotating shaft which hammers are mounted.The hammers are free to swing on the ends of the cross, or fixed to the central rotor.The rotor of metal crusher is spun at a high speed inside the drum while material is fed into a feed hopper.The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size.Then metal crusher create a product which is both clean and of high bulk density suitable for transportation.
Typical Application:
Electronic Scrap -Â WEEE Directive Materials
Steel Scrap -Â Various metal scrap, metal drum, paint bucket, gasoline drum, bicycle, color steel tile, steel sheet etc
Aluminum -Â Castings, Profiles, UBC's etc.
ELV's (End of Life Vehicles) -Â Pre-shredded vehicle bodies
SLF (Shredder Light Fraction), ASR (Auto Shredder Residue)
Main Features
Strong welded construction from heavy gauge, wear resistance steel plate.
Durable, wear resistant, replaceable hammers, milling rings and chamber liners in metal crusher
Oversized, spherical rotor bearings with seal protection-prevents bearing damage due to product migration
Stable boot ,low noise,foundation installation
Adjustable product size control
Replaceable wear plates in the chamber of scrap metal drum crusher
Hydraulic open top system to speed up service and maintenance requirement and reduce down time
Stand Alone Electrical Control Panel -Â using quality Schneider(Telemecanique) components and Siemens PLC's Tested, Approved and Certified to the applicable CE safety standards
1.Technical Specification
Â
Metal shredder | HS1280 | HS1210 | HS1214 | HS1680 | HS1690 | HS1614 | HS1815 |
Motor | Siemens | Siemens | Siemens | Siemens | Siemens | Siemens | Siemens |
Power (Kw) | 75-132 | 110-200 | 200-315 | 132-200 | 260-400 | 315-500 | 400-500 |
Voltage | As per request | As per request | As per request | As per request | As per request | As per request | As per request |
Infeeding size (mm) | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 |
Output size (mm) | 20-120 | 20-120 | 20-120 | 40-120 | 50-200 | 50-200 | 50-200 |
Capacity (t/h) | 2-3 | 3-5 | 4-6 | 3-5 | 5-8 | 6-10 | 8-12 |
2.Service
Pre-sale support
*Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.
*On-site inspection
After-sale service
*Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.
*Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request.This will enable customers to optimize the performance of their new plant.Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technician.Dimensional drawings together with service requirements will be provided prior to delivery of the equipment, which make time for our customer to prepare the site and commence production in time.
Technical support
*Shredwell provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
3.Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery.Our equipment is based on self-owned intellectual property and has advanced European and American technology.
Shredwell has now been in the shredding and recycling industry for more than 10years.Our engineering team has around 15 years experience in designing and manufacturing shredding and recycling systems for scrap tires,scrap metal,waste wood,plastic...Our workforce has more than 5 years experience in manufacturing shredding machinery.Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers.Our main focus is to provide our customers cost-effective tire recycling system, metal recycling system, e-waste recycling system, solid waste recycling system etc.
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop.Our mission is to provide our customers the best recycling solutions with high quality service and technology.
4. FAQ for metal recycling machine
1)  Are you a factory or trade company?
We are professional recycling shredder factory with the modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.  Export proportion around 50%. .
2) How can IÂ trust your company?
a. modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
b. famous brand component as our standard configuration, like Siemens Motor, Tongli or SEW reducer, Siemens PLC and Schneider component. All parts processing by CNC machining to warranty the precision.
b. Assessed by third party-national test centre. national patents for all equipment, also CE, ISO.
c. Welcome to inspect anytime. We are near to Shanghai airport.
d. About the machine, we do much better on:Wear plates, seals, structure design, pressure head.
3) How about the test running &Â installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping out your machines, we will invite you to come to test your machines, when you are satisfied; we start to pack and delivery.
We will send our enginner team(At least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, and commission as well as training your workers.
4) Any warranty?
Under the proper usage, 1-3 year for whole machine.
5)Â Â Is your price competitive?
Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.
5. Contact Detail:Â
Mary yang |Â Senior sales concultant
Phone: +86-18351587733
Welcome to contact us at any time We will reply you within 24 hours
Your's recycling expert: Metal recycling machine supplier---Shredwell recycling
Product Description
The water and air dual purpose series drilling rig is a multifunctional drilling rig that integrates water and air drills. This is the first one in China. The drilling rig adopts an AMT manual automatic transmission. Sensitive and convenient switching between positive and negative. Compared with hydraulic transmission, the power consumption is reduced by 35%, making it more efficient and energy-saving. The drilling rig has a fast speed and can be used in conjunction with a Mud Pump to solve the problem of difficult drilling with a soil gas down-hole hammer. The boring machine has high torque and can slide up and down. Deep hole drilling can be used for hard rock layers, gravel layers, and pebble layers below deep wells. Drill with a down-hole hammer. This drilling rig can be professionally engaged in drilling, monitoring wells, geothermal air conditioning drilling, diamond bit wired coring drilling, and engineering geological survey operations.
The main characteristics of the drilling rig:
1. The drilling rig is equipped with a hydraulic drill tower, hydraulic support legs, and a winch, and the power head can slide up and down. Hard rock can be used for DTH hammer drilling.
2. The drilling rig adopts a long stroke dual speed mechanism and mechanical power head, with a power head stroke of 3400mm, which is used to improve drilling efficiency and reduce the occurrence of blockage and burning accidents.
3. The drilling rig adopts dual oil pumps for oil supply. When feeding, a single pump is used, and when lifting the drill pipe, a dual pump combination is used; Low power loss and short auxiliary time.
4. The drilling rig has reserved some functional interfaces in the hydraulic system, which can be expanded according to the process requirements of different users.
Mutifunction Drilling Machine,Multi Purpose Drilling Rig,Multi Function Drilling Machine,Multipurpose Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com