Unique technology foam finishing machine developed successfully

Shanghai Pacific Textile Machinery Complete Equipment Co., Ltd. Printing and Dyeing Machinery Branch cooperated with Donghua University to develop a foam finishing machine with unique technology. The foam finishing machine is a typical low-energy-saving energy-saving device, which ensures the uniform distribution of chemical agents under the condition of minimum moisture supply, fully conforms to the development direction of green dyeing and finishing, and is mainly used for sizing and softening of pure cotton, chemical fiber and blended fabrics. And use various types of foams such as resin.

This model has significant energy saving and consumption reduction, which can reduce water consumption by 50%~80%, chemical consumption by 20%, and drying heat energy by more than 55%. After finishing, the fabric has low moisture content, which can avoid "swim" and reduce surface resin. The elasticity index is higher than conventional padding. In addition, the equipment can be used in combination with a heat setting machine, a loose dryer, and a pre-shrinking machine, and can be extended to foam mercerizing, foam printing, and the like.

Molybdenum Carbide Welding Wire

We offer welding wires for low, medium and high alloy hardfacing, for mild steel fabrications, Diameters range from 1.2 mm to 4.0 mm, using our own manufacturing technology. In addition to cored wires, our range of consumables includes tubular welding electrodes.

HP Welding manufactures an extensive range of flux cored and metal cored hardfacing consumables. We offer welding wires for low, medium and high alloy hardfacing, which provide the ultimate protection against various types of wear, including abrasion, erosion, impact, mechanical fatigue, and more.

Our range of hardfacing welding wires dedicated to increasing abrasion resistance. Flux cored wires and metal cored wires suitable for increasing wear resistance of parts such as screw conveyors, fans, equipment used in agriculture & mining, grinding mills, vertical mills, screws, blades, ventilators and more.

HP Welding manufactures a range of flux cored Welding Wire and metal cored welding wire for different cladding applications to increase wear resistance. With our cladding wires, you will prevent wear problems from abrasion, impact, temperature, corrosion and increase the service life of your parts.

HP Welding wire has wide field of application: buffer layer before hardfacing, assembly of wear plates and armouring, and of manganese steels

HP Welding wire is of non-magnetic deposit strongly resistant to impact and high pressure, highly resistant to cracking - austenitic structure that work-hardens strongly

HP Welding wire is good material for rebuilding, buffer layers and assembly of manganese steels

HP Flux Cored Wire Spec data, Chemicals and Applications

Item	Chemicals								Hardness (HRc)	Application
	C	Si	Mn	Cr	Mo	B	Others	Fe
HP-280Mo	4.5	0.8	0.6	28	1			Balance	58~62	Coal Mill; Vertical Mill
HP-280	4.5	0.8	0.6	28			Ni:0.15	Balance	58~62
HP-252B	5	0.8	0.6	25		0.38		Balance	58~62	Wear Plate
HP-252B+	5	0.8	0.6	25		0.7		Balance	59~64	Wear Plate
HP-1996	0.08	0.8	6.5	19.8			Ni:9	Balance	HB180-220	Buffer layer
HP-250	0.11	0.5	1.5	1.1	0.25			Balance	24-32	Welding Recondition Backing weld
HP-265	5	0.7	0.5	22			Nb:7	Balance	61-64	Slag Mill; Hardfacing Enhancement Layer

Molybdenum Carbide Welding Wire,Stainless Steel Flux Core Welding Wire,Stoody Flux Cored Welding Wire,Premium Hardfacing Welding Wire

HuiFeng Wear Resistant Group , https://www.hpwearsolution.com