Tyre Care Tips How to Deal with a High-speed Tyre Accident
Â
Vehicle tire safety and maintenance and how to deal with high-speed tire burst
　　
What are the causes of flat tires? Safety experts at Fujian Mithun Shield Tire Safety Device Technology Co., Ltd. believe that high-speed tire bursts often have five major causes:
1, overload, speeding;
2, the road condition is not good;
3, tire pressure is too high or too low does not meet the safety requirements;
4, the tire has been repaired due to internal injuries or air bubbles in the tire ply;
5, the tire surface is excessively worn or affected by oil corrosion.
Dr. Gong reminded the riders to pay special attention to the maintenance of the automobile tires, so as not to overload, speeding, check the tire pressure every month, not too high or too low, it should be emphasized that the spare tire pressure also needs regular inspection; Regularly perform tire static balance and dynamic balance check to reduce abnormal wear of tires; beware of abnormal bumpy vehicles, if any abnormalities should be immediately carried out four wheel alignment check; tires should be regularly transposition, remember not to change tire specifications, otherwise it will be due to vehicle machinery The inconsistency has led to a series of problems. Good driving habits and daily maintenance of the tire can reduce the possibility of a flat tire to a certain extent.
Tires are the most easily worn parts of a car. Tire blowouts are usually caused by external factors. Routine maintenance can only reduce the likelihood of a puncture. A puncture is still very dangerous. If the vehicle bursts suddenly during high-speed driving, the rolling friction resistance of the wheel will increase by 33 times within 0.3 seconds, causing the wheel slippage to completely lose control, and the driver will not be able to respond and self-help within 0.3 seconds. Convert to traffic accidents. Once a high-speed puncture occurs, the driver should hold the steering wheel tightly and cannot let the direction get out of control. Stop the vehicle in the emergency lane as much as possible. Do not rush the direction and brake suddenly. This will cause even greater damage.
However, it is not difficult to find from the above analysis that vehicle control after high-speed puncture is too dependent on the driver's sensitive response and skilled driving skills. To completely avoid traffic accidents, it is necessary to rely on the tire's own safety device. Passed by the Ministry of Public Security, the tire safety device independently researched and developed by Fujian Miesid Shield Tire Safety Device Technology Co., Ltd. has been used to puncture tires in cars, off-road vehicles, commercial vehicles, ambulances, police vehicles, and passenger buses. At the same time, the vehicle can continue to drive safely in the original direction and avoid accidents. 100% guarantees the safety of the vehicle and the occupants. On the 11th of this month, Mies shield tire safety device company successfully passed the ISO9001:2008 quality management system certification of China Quality Certification Center (CQC).
The former teacher does not forget that the lessons learned from subsequent accidents are not as good as safety precautions in advance. Mies Dun’s tire safety device experts reminded drivers that they must pay attention to tire safety upgrades and must be installed to ensure absolute safety of the car and the human body. Safe tire safety device.
Cogged Belt,Toothed V Belt,Raw Edge V Belt,Cogged V Belt Sizes
Acron Power Transmission (zhejiang) Co.,Ltd , https://www.acronpower.com