Surveillance camera installation steps

Step 1: Take out the bracket and prepare the tools and parts: necessary tools such as expansion plugs, screws, screwdrivers, small hammers, electric drills, etc.; according to the pre-determined installation position, check the size and model of the expansion plugs and self-tapping screws, and try one Check whether the screws of the bracket and the base of the camera are suitable, whether the pre-embedded pipeline interface is handled properly, whether the cable is unblocked, and enter the installation procedure when ready.

Step 2: Take out the camera , carefully install the lens according to the pre-determined camera lens model and specifications (the infrared integrated camera does not need to install the lens), be careful not to touch the lens and the CCD with your hands to confirm that the fixing is secure, then turn on the power. Connect to the host or use a monitor or small TV on site to adjust the focal length of the aperture.

Step 3: Take out the bracket, expansion plug, screw, screwdriver, small hammer, electric drill and other tools, and install the bracket according to the predetermined position. After checking it firmly, install the camera in the agreed direction;

Step 4: If you need to install the shield, after the second step, install the shield directly from here.

1. Open the upper cover and rear baffle of the shield;

2. Pull out the fixed metal sheet and fix the camera;

3. Put the power adapter into the protective cover;

4. Reset the upper cover and the back baffle, straighten out the cables, fix them, and install them on the bracket.

Step 5: Insert the welded BNC plug of the video cable into the socket of the video cable and confirm that it is firmly fixed.

Step 6: Insert the power output plug of the power adapter into the power socket of the surveillance camera, and confirm the firmness.

Step 7: Connect the other end of the cable to the control host or monitor (TV) to ensure it is secure.

Step 8: Turn on the power of the monitoring host and the camera, and adjust the camera angle to the predetermined range through the monitor.