Spiral Auger Feeder Screw Conveyor System (LS159)
Screw conveyor system is general-purpose transportation equipment which use rotating of the helical vane, and promote the material move forward along the machine body, it is suitable for transport powder, granule and small piece of material. Horizontal, inclined, or vertical conveyors are also available.
For Choosing different type according to your special situation
1.Tubular type screw conveyor
2.Trough type screw conveyer
3.Hopper type screw conveyor
Features for screw conveyor system
(1) Installation, disassembly and maintenance is very convenient, and low failure rate
(2) Simple structure, small size, so the occupied area and space is not very big
(3) Can have multiple feeding port and discharging port as needed
(4) Easy to form the production line, can be connected with packaging equipment, storage equipment, mixing equipment or screening equipment
(5) Can be customized with hopper or running wheels and others
(6) Reliable sealing
Technical parameters
| Model | LS100 | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | |
| Diameter mm |
100 | 160 | 200 | 250 | 315 | 400 | 500 | |
| Screw pitch mm |
100 | 160 | 200 | 250 | 315 | 355 | 400 | |
|
Technical parameters |
N(r/min) | 140 | 112 | 100 | 90 | 80 | 71 | 63 |
| Q | 2.2 | 8 | 14 | 24 | 34 | 64 | 100 | |
| N(r/min) | 112 | 90 | 80 | 71 | 63 | 56 | 50 | |
| Q | 1.7 | 7 | 12 | 20 | 26 | 52 | 80 | |
| N(r/min) | 90 | 71 | 63 | 56 | 50 | 45 | 40 | |
| Q | 1.4 | 6 | 10 | 16 | 21 | 41 | 64 | |
| N(r/min) | 71 | 50 | 50 | 45 | 40 | 36 | 32 | |
| Q | 1.1 | 4 | 7 | 13 | 16 | 34 | 52 | |
Initial start-up
| 1. Start screw conveyor and operate without material for several minutes. 2. Feed material gradually until design capacity is reached. 3. Do not exceed conveyor speed, capacity and material density. 4. Check all assembly and mounting bolts. |
Maintenance
Keep area around screw conveyor clean and free of obstacles and to avoid interference with the function of the screw conveyor.
Periodic inspections should be made of the following:
1. Bearings: check for proper lubrication. Lubricate all bearings in accordance with manufacturer's instructions. Â
2. Gear reducers: check for proper lubrication. Lubricate all bearings in accordance with manufacturer's instructions.
3. Screw blade: check for damage, excessive wear and material buildup. Replace screw blade sections as necessary.
4. Tube or troughs: check for damage, excessive wear and material buildup. Replace tube or trough sections as necessary.
5. Seal: check for leakage. Adjust seal or replace packing as necessary.
6. Assembly bolts: check for tightness.Â
How to choose one set of screw conveyor system, please let's know the following questions:
1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.
2. What is the processing capacity per hour?
3. What is the inclination angle needed?
4. What is the conveying length or tell us the distance from inlet to outlet?
Email us and let's suggest the suitable model for you...
Â
Â
Description of Spiral Auger Feeder Screw Conveyor System (LS159)Screw conveyor system is general-purpose transportation equipment which use rotating of the helical vane, and promote the material move forward along the machine body, it is suitable for transport powder, granule and small piece of material. Horizontal, inclined, or vertical conveyors are also available.
For Choosing different type according to your special situation
1.Tubular type screw conveyor
2.Trough type screw conveyer
3.Hopper type screw conveyor
Features for screw conveyor system
(1) Installation, disassembly and maintenance is very convenient, and low failure rate
(2) Simple structure, small size, so the occupied area and space is not very big
(3) Can have multiple feeding port and discharging port as needed
(4) Easy to form the production line, can be connected with packaging equipment, storage equipment, mixing equipment or screening equipment
(5) Can be customized with hopper or running wheels and others
(6) Reliable sealing
Technical parameters
| Model | LS100 | LS160 | LS200 | LS250 | LS315 | LS400 | LS500 | |
| Diameter mm |
100 | 160 | 200 | 250 | 315 | 400 | 500 | |
| Screw pitch mm |
100 | 160 | 200 | 250 | 315 | 355 | 400 | |
|
Technical parameters |
N(r/min) | 140 | 112 | 100 | 90 | 80 | 71 | 63 |
| Q | 2.2 | 8 | 14 | 24 | 34 | 64 | 100 | |
| N(r/min) | 112 | 90 | 80 | 71 | 63 | 56 | 50 | |
| Q | 1.7 | 7 | 12 | 20 | 26 | 52 | 80 | |
| N(r/min) | 90 | 71 | 63 | 56 | 50 | 45 | 40 | |
| Q | 1.4 | 6 | 10 | 16 | 21 | 41 | 64 | |
| N(r/min) | 71 | 50 | 50 | 45 | 40 | 36 | 32 | |
| Q | 1.1 | 4 | 7 | 13 | 16 | 34 | 52 | |
Initial start-up
| 1. Start screw conveyor and operate without material for several minutes. 2. Feed material gradually until design capacity is reached. 3. Do not exceed conveyor speed, capacity and material density. 4. Check all assembly and mounting bolts. |
Maintenance
Keep area around screw conveyor clean and free of obstacles and to avoid interference with the function of the screw conveyor.
Periodic inspections should be made of the following:
1. Bearings: check for proper lubrication. Lubricate all bearings in accordance with manufacturer's instructions. Â
2. Gear reducers: check for proper lubrication. Lubricate all bearings in accordance with manufacturer's instructions.
3. Screw blade: check for damage, excessive wear and material buildup. Replace screw blade sections as necessary.
4. Tube or troughs: check for damage, excessive wear and material buildup. Replace tube or trough sections as necessary.
5. Seal: check for leakage. Adjust seal or replace packing as necessary.
6. Assembly bolts: check for tightness.Â
How to choose one set of screw conveyor system, please let's know the following questions:
1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.
2. What is the processing capacity per hour?
3. What is the inclination angle needed?
4. What is the conveying length or tell us the distance from inlet to outlet?
Email us and let's suggest the suitable model for you...
Â
Â
The CNC milling process is a digital manufacturing process that is implemented by computer numerically controlled (CNC) machines. This process is used to produce parts with complex shapes, and the manufacturing process involves multiple steps. The following are the detailed steps of the general CNC milling process:Design: First, you need to design a CAD model of the parts you want to produce. A CAD model is a three-dimensional image created using computer-aided design software that can describe the shape, size, and features of a part.Programming: Next, you need to convert the CAD model into G-code, which is a type of computer instruction that controls the movement and operation of the CNC machine. G Code can be written manually or generated automatically using CAM software.Prepare the machine: Before you start machining, you need to check and prepare the CNC machine. This includes checking the machine's coordinate system, setting tools and cutters, and setting parameters such as the machine's speed and feed speed.Processing: After the machine is ready, the processing can begin. The machining process usually consists of multiple steps, such as roughing, finishing and drilling. At each step, the CNC machine moves tools and workpieces according to instructions in the G code to achieve the desired cutting operation.Inspection: After processing, the parts need to be inspected to ensure that they meet the design requirements and specifications. Inspection can be carried out by using measuring instruments, templates and other testing tools.Polishing and surface treatment: Parts can be polished and surface treated if needed to improve their surface finish and corrosion resistance. This can be done through the use of abrasives, chemicals and other tools.In short, the CNC milling process is a high-precision, high-efficiency manufacturing process for the production of parts with complex shapes. Through the control of CAD model and G code, the precise control of machine motion can be realized, so as to achieve high-precision parts processing.
Cnc Milling Online,Cnc Milling Part,Cnc Metal Milling Machining,Cnc Milling Services
Dongguan ganzoo prototype manufacture co.,ltd , https://www.dgpmsheetmetal.com