Simple analysis of the use of magnetic stirrers

How can a magnetic stirrer be used better during use? Today we will give you a brief introduction to the proper use of magnetic stirrers.

Plug in the power, place the vessel containing the solution in the middle of the heating plate, and place the rotor in the solution of the vessel. Turn on the power, the indicator light, and then adjust the speed control knob clockwise, the speed from slow to fast, adjusted to the required speed, the rotor rotation to drive the solution to stir.

When it needs constant temperature heating, insert the temperature measuring probe into the solution, insert the plug into the rear seat of the stirrer, and adjust the temperature knob to the desired temperature. If the temperature accuracy of the solution is required, use a thermometer to measure the temperature of the solution at the same time, and then adjust the temperature knob to reach the required temperature. If you do not need to heat, just put the temperature adjustment knob below room temperature.

To control the timing operation, turn the timer switch clockwise to the desired temperature position. At this time, the power light is on and the instrument is in working condition. When the timer switch is automatically turned to the starting position, the stirring stops automatically.

PVC Pipe Fitting Mould

PVC Pipe Fitting Mould

Taizhou Huangyan YouGo Mould & Plastic Co., Ltd , http://www.plastic-moulds.com