Seaflo AC/DC High Flow Industrial Water Transfer Pump
Model NO.: SFDP2-020-030-33
Certification: ISO9001:2008, CE, UL
Condition: New
Application Field: Industry
Voltage: 24V
Flow Rate: 7.6lpm/2.0gpm
AMPS: 3.0A Max
Pressure: 30psi/2.1bar
Port Dimension: 0.82"(20.95mm)
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Model NO.: SFDP2-020-030-33
Certification: ISO9001:2008, CE, UL
Condition: New
Application Field: Industry
Voltage: 24V
Flow Rate: 7.6lpm/2.0gpm
AMPS: 3.0A Max
Pressure: 30psi/2.1bar
Port Dimension: 0.82"(20.95mm)
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
SEAFLO AC/DC high flow industrial water transfer pump7.6LPM/2.0GPM 30PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Motor Voltage | 12/24V DC |
| Type | 3 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 45psi (3.1bar) |
| Max Flow rate | 11.6lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
| SFDP1-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
7.6LPM/2.0GPM 30PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Motor Voltage | 12/24V DC |
| Type | 3 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 45psi (3.1bar) |
| Max Flow rate | 11.6lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
| SFDP1-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
With customized folding options, superior security and an easy to operate design. Maximize your entry space and create a seamless indoor-outdoor entertaining experience with our bi fold doors. Opening almost effortlessly along high-performance rollers. They are stylish, modern and practical.
Door Frame,Aluminium Door Panel,Knockdown Door Frame,Interior Door Frames
Huiye Hardware & Electrical Equipment Company Ltd. , https://www.jmhuiyehardware.com