Regulations and Regulations Introduce Tests on the Manufacturing Level of Textile Equipment
Ten ministries and commissions including the National Development and Reform Commission and the Ministry of Finance jointly issued the "Notice on Accelerating the Adjustment of the Textile Industry Structure and Promoting Industrial Upgrades". This is a notice issued by the National Development and Reform Commission and other ministries and commissions following the coal, aluminum and cement industries. In an interview with reporters, relevant persons from the National Development and Reform Commission pointed out that although China's textile industry has shown rapid development in recent years, the quantitative growth characteristics are very obvious. There is a lack of innovative capacity, lack of independent brands, lagging raw material development, and unbalanced regional development. Structural conflicts. To this end, accelerating the adjustment of the industrial structure is one of the most urgent tasks at present.
According to relevant persons from the National Development and Reform Commission, in order to promote the transformation of economic growth mode in the textile industry as soon as possible, the “Eleventh Five-Year Plan†period will speed up the adjustment of the technological structure and increase the added value of products; increase the adjustment of raw material structure and realize the diversification of raw materials; make the key textile processing technology And equipment manufacturing has reached the international advanced level.
It is understood that although the current textile industry is basically balanced in terms of production and demand, the overall development trend is good, but it is also facing new problems. In response to the current rapid increase in production capacity of conventional chemical fiber products, and the lack of supply of functional and differentiated fibers, and the delayed development of supporting materials, the Opinions point out that in the “Eleventh Five-Year Plan†period, it is necessary to accelerate the construction of chemical fiber materials such as PX, MEG, and CPL. Raise the self-sufficiency rate of chemical fiber raw materials; increase the R&D and industrialization of non-cotton natural fiber and new solvent-regenerated viscose regenerated resource fiber; carry out the recycling development and utilization of waste polyester and recycled fiber, and increase the proportion of natural and renewable resource-based fibers. At the same time, continue to expand the application of textile products, vigorously develop industrial textiles such as medical, automotive, construction, and filter materials; by 2010, increase the differential rate of chemical fiber from the current 30% to 40%; focus on the development of cotton spinning high count yarn , combed yarns and special yarns.
People concerned with the National Development and Reform Commission pointed out that the lack of independent innovation capability is a very important issue facing China's textile industry. According to statistics, currently the entire industry R&D investment accounts for only 0.3% of sales revenue, and most of the high-tech and high-end textile equipment relies on imports. Therefore, in the future, we must strengthen the research and development of high-tech, functional, differentiated fiber and textile advanced processing technologies, clean production technologies, and key industrial equipment.
Problems such as the large gap between the central and western regions aggravated the structural contradiction in the textile industry. According to the “Opinions†and the “Eleventh Five-Year Plan†period, the coastal areas and central cities will appropriately control the expansion of the production capacity of cotton spinning and chemical fiber conventional products, focusing on breakthroughs in fashion brands, R&D and design, market control, etc.; By utilizing labor resources, raw materials, and land resources, we will develop labor-intensive processing and manufacturing industries supporting the eastern region, and undertake industrial transfer from central cities, coastal areas, and foreign countries to form a gradient industry structure with distinctive features and comparative advantages. In addition, with regard to the current situation in which the development of the industry is increasingly constrained by resources and the environment, the Opinions point out that by 2010, the use of fiber for the production value of the textile industry will decrease by 20%, and the consumption of water per ton of fiber will decrease by 20%.
According to relevant persons from the National Development and Reform Commission, in order to promote the transformation of economic growth mode in the textile industry as soon as possible, the “Eleventh Five-Year Plan†period will speed up the adjustment of the technological structure and increase the added value of products; increase the adjustment of raw material structure and realize the diversification of raw materials; make the key textile processing technology And equipment manufacturing has reached the international advanced level.
It is understood that although the current textile industry is basically balanced in terms of production and demand, the overall development trend is good, but it is also facing new problems. In response to the current rapid increase in production capacity of conventional chemical fiber products, and the lack of supply of functional and differentiated fibers, and the delayed development of supporting materials, the Opinions point out that in the “Eleventh Five-Year Plan†period, it is necessary to accelerate the construction of chemical fiber materials such as PX, MEG, and CPL. Raise the self-sufficiency rate of chemical fiber raw materials; increase the R&D and industrialization of non-cotton natural fiber and new solvent-regenerated viscose regenerated resource fiber; carry out the recycling development and utilization of waste polyester and recycled fiber, and increase the proportion of natural and renewable resource-based fibers. At the same time, continue to expand the application of textile products, vigorously develop industrial textiles such as medical, automotive, construction, and filter materials; by 2010, increase the differential rate of chemical fiber from the current 30% to 40%; focus on the development of cotton spinning high count yarn , combed yarns and special yarns.
People concerned with the National Development and Reform Commission pointed out that the lack of independent innovation capability is a very important issue facing China's textile industry. According to statistics, currently the entire industry R&D investment accounts for only 0.3% of sales revenue, and most of the high-tech and high-end textile equipment relies on imports. Therefore, in the future, we must strengthen the research and development of high-tech, functional, differentiated fiber and textile advanced processing technologies, clean production technologies, and key industrial equipment.
Problems such as the large gap between the central and western regions aggravated the structural contradiction in the textile industry. According to the “Opinions†and the “Eleventh Five-Year Plan†period, the coastal areas and central cities will appropriately control the expansion of the production capacity of cotton spinning and chemical fiber conventional products, focusing on breakthroughs in fashion brands, R&D and design, market control, etc.; By utilizing labor resources, raw materials, and land resources, we will develop labor-intensive processing and manufacturing industries supporting the eastern region, and undertake industrial transfer from central cities, coastal areas, and foreign countries to form a gradient industry structure with distinctive features and comparative advantages. In addition, with regard to the current situation in which the development of the industry is increasingly constrained by resources and the environment, the Opinions point out that by 2010, the use of fiber for the production value of the textile industry will decrease by 20%, and the consumption of water per ton of fiber will decrease by 20%.
As
the name suggests, Diaphragm Metering Pump using a special design and
processing of flexible diaphragm instead of the piston, under the action
of the drive mechanism to achieve reciprocating motion, complete the
suction - discharge process. Due
to the segregation of the diaphragm, the isolation between the metering
fluid and the driving lubrication mechanism is realized in the
structure. High-tech structural design and the selection of new materials has
greatly improved the service life of the diaphragm, coupled with
excellent corrosion resistance of composite materials, diaphragm
metering pumps become the main application of fluid measurement pump
type.
If you want to buy Mechanical Diaphragm Metering Pump, Solenoid Diaphragm Metering Pump, Plunger Dosing Pump , Water Treatment Dosing Pump, Plastic Chemical Diaphragm Metering Pump, please contact us.
Plunger Metering Pumps
Plunger Metering Pumps,Small Plunger Metering Pumps,Jzr Series Plunger Metering Pumps,Chemical Piston Plunger Metering Pumps,Chemical Injection Pump,Plunger Dosing Pump
Zhejiang Ailipu Technology Co., LTD. , https://www.alipu.com