Microcomputer Bearing Heater Operating Instructions (HA-1/2/3)
2. Insert the heater power plug into the power socket and turn on the switch on the side of the heater housing. After the power is turned on, the digital display is on, indicating that the temperature is 110°C. At this time, the heater is in temperature control mode;
3. Press the key to select the temperature value of the workpiece to be heated. Press once the temperature change is 1. Press and hold the temperature value continuously to change.
4. Press the START key to start the heater to heat the workpiece.
5, when heated to the set temperature, there are sound prompts, and automatic shutdown;
6. If you need the temperature maintenance function, just press the temperature maintenance key before performing the 4th operation.
7. If the time control mode is used, just press the time key to enter the time control mode after power on. The time setting can be arbitrarily selected within 99 minutes and 59 seconds. Press 1 time to change the value, press and hold the time value continuously change. After the selected time, press the START key to start the heater to heat the workpiece.
8, when heated to the set time, there are sound prompts, and automatic shutdown;
When using the time control mode, there is no need to use a temperature sensor. At this time, the temperature sensor should be removed from the workpiece to prolong the service life of the sensor.
The microcomputer controlled induction heaters produced by our company have reached and reached the same domestic and international products. Widely used in metallurgy, mining, textile, paper, petrochemical, chemical, power, mining and other fields of mechanical maintenance departments and machinery and electrical manufacturing units.
Microcomputer control induction heater parameter performance:
â—† Fast heating, high output power â—† Adopt frequency conversion technology to realize any heating workpiece â—† Quiet environment-friendly without fume pollution, precise control and temperature control â—† Save money, save time, save electricity, save fuel, improve assembly quality â—† Reliable operation is simple, heating Uniform, no open fire hazard
What shall we do if the air is dry at home
What if the indoor air is too dry? Learn these methods, you can automatically humidify. Learn quickly, life tips, life tips, life tips
1. Use empty bottles and water cans to contain clean water and put it everywhere in the room. In addition, after cleaning the open glass bottle after daily use, inject clean water and place it in an inconspicuous corner of the room, which is equivalent to adding several small water environments to the room and has an obvious effect on improving the humidity of the room.
2. Fish and green plants.
Raising green plants can urge the room to maintain appropriate humidity, especially ferns, because they can grow healthily under a certain humidity. Watering and often spraying leaves with water are conducive to improving the air humidity in the room.
Large green plants, such as dripping Guanyin and scattered tail sunflower, are themselves an Air Purifier, which can bring a clean and moist atmosphere to the home environment when placed in the room.
3. Increase the frequency of room cleaning. Wipe the ground with a damp mop, humidify it while cleaning, and increase the cleaning frequency to humidify the room several times. Often wipe furniture with a damp cloth can also humidify the room.
4. Dry the washed clothes naturally. The cleaned clothes can omit the drying and drying steps, and can be hung indoors for natural drying, which can effectively increase the humidity of the room.
5. The warm and humid water and gas in the bathroom humidifies the room. After taking a hot bath in winter, the water vapor in the bathroom is thick. At this time, open the bathroom door, the warm and wet water vapor flows to other rooms, and the humidity increases several times in an instant.
6. Humidify the towel on the radiator and put a basin of water under it. Put a wet towel on the heating. The heating has moisture when radiating, which can also increase the air humidity.
7. Often open windows for ventilation. The outdoor air humidity is relatively higher than the indoor air. You can open the window in the morning and afternoon to change the indoor air flow.
8. Use the humidifier aroma diffsuer. Humidifier humidification is one of the commonly used methods of indoor humidification. However, humidifiers need to be regularly cleaned to prevent bacteria in the humidifier from spraying into the air with water spray. They can use Aroma Diffuser, ultrasonic spray, no need to replace STICKER.
Electric aroma diffuser, Electric scent diffuser, Electric essentail oil diffuser, Fragrance diffuser electric, Defusers electric diffuser
Shenzhen Ewong Technology CO.LTD , https://www.ewongteches.com