How to Reduce Heat Loss with Active Lime Rotary Kiln

How to Reduce Heat Loss with Active Lime Rotary Kiln

Introduction: With the government's awareness of environmental protection greatly enhanced, many companies are now focusing on energy conservation and environmental protection. When a business purchases a rotary kiln, it not only hopes to bring huge benefits to the company's production, but also requires energy conservation and environmental protection in the production process, and hopes to minimize environmental pollution and damage.

At present, rotary kiln is widely used in metallurgy, building materials, chemical, refractory, ceramic, papermaking and other industries. So, how can the active lime rotary kiln reduce the heat loss and allow the equipment to achieve low energy consumption? Take Zheng's mine machine as an example, the measures to reduce energy consumption are as follows:

1. The vertical preheater is arranged in the kiln to make full use of the high-temperature flue gas produced in the rotary kiln to preheat the limestone from the normal temperature to the initial decomposition state so as to reuse the heat and reduce the heat loss.

2. Make a new change in the structure of the furnace and greatly improve its heat transfer efficiency and decomposition rate.

3, increase the efficient heat exchanger to the system, the kiln sealing device to be modified to promote the air leakage coefficient has decreased.

4. The selection and design of refractories should be the best, so as to effectively reduce the temperature of the kiln shell surface.

5. Limestone uses crystal grains less than one millimeter. The limestone used is small and uniform in size, and the fuel must have high calorific value.

Source: Henan Zhengyuan Machinery Co., Ltd.

Waste Rubber Pyrolysis Plant introduction:

Waste Rubber Pyrolysis Plant can refine the waste rubber into fuel oil by pyrolysis process. The final product will be base oil which can be made into diesel and gasoline.


1.Working process Of waste rubber  pyrolysis plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460 C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

 

 

2. Model of waste rubber Pyrolysis plant:

 

Model

Reactor size

Material

Handling capacity

Weight

Seaworthy packing

LJ-8

2200*6000mm

Q245R boiler steel plate

5 tons

24tons

2*40HQ

LJ-9

2200*6600mm

Q245R boiler steel plate

8tons

26tons

2*40HQ

LJ-10

2600*6600mm

Q245R boiler steel plate

10tons

30tons

1*40FR+1*40HQ


3. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the pyrolysis plant,and buyer will be in charge of the food, accommodation and round air tickets.

4. Land requirement: 300sq meters(10m*30m)

5. Exporting Experience:

 America:

Brazil, Canada, Colombia, USA,

Middle East:

Dubai, Iran, Jordan, Saudi Arabia, Turkey

Europe:

Albania , Bosnia and Herzegovina

Asia:

Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar

Africa:

Ghana, Mozambique, Zambia

 

 

Waste Rubber Pyrolysis Plant

Waste Rubber Pyrolysis Plant,Tire Pyrolysis Plant,Waste Rubber Pyrolysis Oil Plant,Waste Tire Oil Pyrolysis Plant

Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com