How to pump oil from the truck tank
When the construction vehicle carries out some special maintenance, or when the vehicle is not used for a long time, I will pump out the oil from the tank of the construction vehicle. How can we get the oil from the fuel tank clean? Here Xiaobian found a way, we look at:
Pumping method 1:
First of all, we have to find the car's filter. The car with the gasoline filter can find the filter of the gasoline next to the mailbox. Why should the filter be installed? Because the car's tank port now has a plastic mesh that prevents pumping. No oiled screws. After finding the filter element, find a tube and place it on the car's filter element. Then open the car to the on position (if you don't know where the on file is, you can read the car manual). . Then you can hear the sound of the car's oil pump starting to work. Such actions will operate several times and the oil in the car's oil tank will come out along the pipe. This method has a certain probability of the risk of damage to the gas pumps, ladies and truck riders be used with caution.
Pumping method two:
This method is very simple and very common, is the use of the siphon method, when the previous oil steal is to use this method. Siphon is a hydrodynamic phenomenon that can pump liquids without the aid of a pump, but with a certain height difference. First, find a pipe inserted into the tank, place it in a container lower than the tank, and then use the mouth to suck oil from the tank, etc., and put the pipe into a well-prepared container. Gasoline will be automatically Go to the six containers. (This method is more soil, but simple and easy to operate)
Pumping method three:
Since pumping maintenance, it must have a more advanced method, the general 4s shop has a special tool to pump the oil, the operation is very easy, the same is also from the filter mouth suction.
Here to say that the siphon method should not be good for the current car, because in order to prevent the theft of the oil, the car manufacturer to carry out a one-way flow of the fuel tank treatment, can only be entered. But the old car is still okay.
Field Pipe Fusion Equipment fuses HDPE / poly / polyethylene pipe and fittings. The aluminum inserts of thermoplastic welding machines can be made in Metric size or IPS size. Wuxi Yuda HDPE Pipe Welding Machines can weld metric size from 40 to 3000mm. How do you fuse HDPE ? Generally speaking, HDPE pipe is butt fused by applying heat to prepared pipe ends and then pushing the pipe ends together with a pre-determined force to make a permanent butt fusion joint. It is a very simple process utilizing a properly sized butt fusion machine for the pipe size to be joined. The Metric HDPE Fusion Machines included:
1. Basic frame– machine body with 4 clamps
2. Complete set of clamp/ metric insert set
3. Heating plate
4. Planing tool
5. Support with electric box for heating plate and planing tool
6. Hydraulic Unit
7.Plasitc welding tools (optional)
Metric HDPE Fusion Machine,HDPE Fusion Machine,HDPE Pipe Welding,HDPE Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com