How to identify the water tanker

Many parts of the rainy season are flooded, and vehicles parked on the road will surely be immersed in water. Once the blisters are over, all aspects of the vehicle will be greatly affected. However, it would be a pity to scrap the sewers directly. Some people will regret it. Simply arrange the bubble car and sell it as a used car. If you do not know how to identify the water tanker, it is very easy to buy a bubble truck, then, how to identify the water tanker?

1, electronic equipment. It's harder for the vehicle's electronic equipment to be repaired once it gets into the water. Even repairs may leave hidden dangers. The failure of the electronic equipment of the swill car will be obvious, unless the vehicle's electronic equipment is replaced, otherwise it will be found.

2, odor. After the vehicle has been immersed in water, it will certainly emit odor. Even if it is sun-dried, it will still have a certain musty smell. If the car smells obvious when buying a vehicle, it may have to pay special attention to the fact that it may exist to conceal odors.

3, water stains. The swill car will be in the water all over the body. Even if it is dried after being picked up, internal parts may still have water stains. Special care must be taken to check such parts as seat belts.

4, the query claims records, most car owners if the car was soaked in the insurance company will apply for a claim, as long as the claim has been applied to leave a trace, there must be a claim record exists. Of course, it does not rule out the falsification of claim records.

5. Chassis. Many parts of the chassis are made of metal, and rust may occur after contact with water. In particular, exhaust pipes, screws, transmission cases, etc. are prone to corrosion, and they must be carefully checked.

6, car lights. The bubble car's headlights will not be used and must be replaced. If it is found that the vehicle's headlights are new and not the original headlights, we must keep an eye on it, especially the fog lights. It is not easy to damage, and the inexplicable replacement will be justified.

7, see the dead. There are many dead spots inside the car. Even if these dead spots are cleaned, it is difficult to clean up all kinds of stains, dirt, and mud.

Tri Clamp concentric reducers, as their name implies, reduce in diameter towards the center thus forming a conical cylinder. A Concentric Reducer is often used inline on a vertical flow application, or if laid horizontally, as an increaser. We do not recommend reducing in the horizontal as pooling may occur. In these cases, an Eccentric Reducer, which lays flat on one side is preferable. Concentric reducers have a lower chance of producing agitation like an end cap reducer may.

Tri Clamp eccentric reducers are designed primarily to reduce in a horizontal flow application. Because they are flat on one side, their is no risk of pooling, unlike their concentric reducer counterparts.They are also well suited when one end is offset from the other in a vertical position. They are designed to be inserted inline and have a lower chance of producing agitation.

1.Connection mode: Clamp,Weld

2.Specification: 1/2"-4", applied to the stainless steel pipeline system

3.Material: SS304, SS316L

4.Standard: ISO, DIN, SMS, 3A etc

5.Application: Beer, food, dairy, beverage, cosmetics, pharmacy etc industries

FAQ:
1.Are you a trader or manufactory?
 We are a manufactory (Own Forging workshop and CNC machining workshop )
 
2.Can your products reach to FDA , CE and 3A requirements?
Yes, all of our material can reach to the requirements of FDA, ISO and 3A Certificate).

3.We can supply:
Sanitary Butterfly Valve, Sanitary Check Valve and Diaphragm Valves, as well as Various Tank Accessories:  Sight Glass, Strainers/Filter, Cleaning Ball, And other Pipe Fittings , (Pipe Unions: SMS, DIN, IDF, RJT, 3A,DS; Fittings: Ferrule,Elbow, Tee, Reducer and all other Non-standrad fittings), each products are tested well by our strictly Quality Control System, and we also have excellent service to support you and promote your business.
 
4.Lead Time:
For large quantity, as usual, it can be sent out within 20-40 days.
Small parcel will be dispatched by DHL, FedEx, UPS OR TNT Courier.
Big cargo will be delivered by Air freight or By Sea.
 
5.Our Service:
About payment:
Payment methods: L/C, T/ T, Paypal,Western Union

6.About samples:
We can provide samples production and service. Usually 2 to 5 days, the sample can be sent to your hands. We will choose the shipping way as you required: By sea, by air or by express. Any question about samples, please contact us.

7.For OEM products:
We will finish the production within 20-40 days after payment has been confirmed.
About delivery and shipping:
We will choose the delivery way as you required: By sea, by air, by express ect. Save your cost is our mission.

8.Warranty:
Any question or problem will be respond within 12 hours.

9.Lifetime service:
Any problem happened to our product, we will do our best to help client to solve it, spare parts will be half price in lifetime.

10.Problem solve:
If you can't solve the problem in your local, please delivery the product to us, we will repair it and then back to you.

11.Quality control:
All the products are calibrated with real working condition, and tested before shipping as qualified product.

12.Purpose:Attitude is everything.

Sanitary Reducer

45 Degree Elbow,90 Degree Elbow,Pipe Connector,Bend Elbow

Wenzhou Qili Fluid Equipment Co., Ltd. , https://www.qlssvalve.com