How much is a blue brand Tuyi 2.5-ton fecal suction truck? [No worries on the license]
How much is the blue brand Tuyi 2.5-ton fecal suction truck? How much is the price of the fecal suction truck? The manufacturer of the fecal suction truck starts at 87,000 yuan. The exact price is determined by the vehicle chassis and top configuration. Welcome to call for details. [Wang Manager 139-9786-4934 Same as WeChat].
Upload configuration
Dongfeng Tuyi cab, wheelbase 2800mm, original air conditioner, direction assist, electric doors and windows, central control lock, cruise control, Bluetooth phone, LED daytime running lights, ABS, Quanchai 95 horsepower, 5-speed gearbox, 185 tubeless tires,
Chassis configuration
Made of high-quality carbon steel, the volume is 2.5 cubic meters, the tank body and the head are made of 6mm plates, the Yifeng oil circulating vacuum pump, with a fecal window, a self-flowing port, hand washing device, 8 meters of sewage suction hose, with filter Net tee, with oil-water separator, vacuum pressure gauge, anti-overflow valve, suction truck with boom seat.
Brief description of components
1. Tank body
The cross section of the tank body is oval. The tank body is made of WISCO Q235A high-quality carbon steel plate with a thickness of 6mm. There are two anti-wave plates welded inside to reduce impact. There is a manhole on the top and a water-gas separator and boom assembly are installed. The tank foot at the bottom of the tank body is fixed with the chassis through U-shaped bolts.
2. Oil and gas separator
The oil-gas separator is mainly composed of an upper cover, a separator body, an oil plug, a positioning sleeve, and a partition plate. It separates the oil and gas coming out of the pump, and the oil flows back into the pump through the oil pipe to lubricate the pump, and the gas is vented through the four-way valve.
3. Water-gas separator
The water-gas separator is mainly composed of an upper cover, a compression spring, an inner sleeve, an outer jacket, and a core. It is used to separate the gas coming out of the tank. The separated water automatically flows back to the tank, and the gas enters the vacuum pump through the four-way valve.
4. Boom assembly
The boom assembly is mainly composed of a boom seat, a suction tube, a guide tube, a counterweight, etc., and is a tool for sucking liquids.
5. Air circuit assembly
The gas circuit assembly is mainly composed of water and gas separator, vacuum pump, four-way valve, crude oil and gas separator, oil and gas separator, pipelines, etc. When the vacuum pump starts to work, manipulate the handle of the four-way valve to the position of "pumping" on the label. The gas in the tank passes through the water-gas separator to separate water and gas, the water automatically flows back to the tank, and the gas enters the vacuum pump through the four-way valve and is discharged. The gas enters the coarse separator. At this time, the gas brings the oil in the pump into the oil and gas separator, and the oil and gas are separated through the separator. The oil and gas flow back to the oil and gas separator through the pipeline through the crude oil and gas separator, and the gas enters the four-way valve to vent. . (Gas-water-gas separator, four-way valve, vacuum pump, coarse separator, oil-gas separator, four-way valve vent)
6. Vacuum pump
The vacuum pump is mainly composed of a rotor, a scraper, a shaft, a cam sleeve, a shell, etc., and the rotational torque is transmitted to the pump from the automobile engine through a power take-off and a drive shaft. The driver can use the joystick in the cab to turn on and off the vacuum pump. The lubrication of the pump is to suck the oil in the oil and gas separator through the oil pipe into the pump body for circulating lubrication during the operation of the rotor.
7. Liquid alarm and level gauge
A liquid alarm is installed on the upper part of the tank, and a plate-type liquid level gauge is installed on the rear head to prevent sewage from overflowing. It can be self-priming and self-draining, easy to suck, with the characteristics of high vacuum and long suction range, which can satisfy different users in different use environments. The fecal suction truck can be equipped with a sprinkler function according to customer requirements. The water and fecal tanks can be separated separately, which can be used for both suction and sprinkling.
Precautions
1. The principle of the carburetor of the fecal suction truck. To enable the fecal suction truck to work continuously (driving), it must continuously supply fuel and air to the engine, not only to supply, but also to mix them properly. Exhaust gas can be discharged smoothly. For this reason, the fuel needs to be stored in a fuel tank. To send the fuel in the fuel tank to the engine, there must be a fuel pump and pipeline. In order to prevent the fuel from being contaminated, a filter is needed to filter it.
2. The outside air contains sand and dust, and the air sent to the engine needs to be filtered by an air filter. How to mix clean air and fuel as needed requires a non-default part, that is, the carburetor of the fecal suction truck. At present, single-stage rotary oil-sealed vacuum pumps are commonly used on fecal suction trucks. The vacuum pump is mainly composed of a pump body, a rotor and its components, a pump casing, a rotary vane, a slip ring, a bearing cover and a sealing device. The rotor is a vulnerable part, for convenience Disassembly and repair, the center of rotor rotation deviates from the center of the pump body.
3. The working principle is that the eccentric rotor works under the drive of the power take-off and sucks the tank into the compression chamber. When the pressure exceeds the specified value of the exhaust port, the compression chamber automatically opens to discharge the compressed air, so that the air inside the tank is Withdraw and repeat the cycle, a vacuum is formed inside the tank. In order to ensure the normal operation of the vacuum pump and avoid pollution, an oil-gas separator and a water-gas separator are installed to filter the water vapor and oil gas in the compressed gas when the suction truck is produced.
Process measures:
1. First correct the stamping and forming of the independent unit parts, and then assemble the points in order from the beginning;
2. Tooling sequence: upper wing plate→web plate→rear tank plugging→front tank plugging→intermediate partition plate→lower wing plate. The size of the spot weld is 50/200mm, and the arc crater should be filled at the end of the spot weld to prevent micro cracks;
3. After spotting, first lap the upper wing plate and the web to press the fillet welds, and then weld the front and rear tank plugging welds, and finally weld the butt joints of the wing plate;
4. In order to control the deformation, adopt the middle split reverse welding method, that is: two people operate in the same way, and the control line energy is the same;
5. The operation should be unified and standardized during welding, especially the welding sequence and welding speed, so that the problem of excessive local deformation can be effectively controlled;
6. After the spot-fixing welding is completed, the tyre will come out as a whole. Before the tyre comes out, loosen all the clamps and fix the can mouth.
car Care:
1. First of all, pay attention to the frequent washing of the car, not too frequently, this will easily damage the paint of the suction truck.
2. Use clean water when washing the car, otherwise the fine sand in the sewage will wipe the float paint.
3. Use clean and special car wash towels. Generally, towels have strong friction and can easily damage the paint of the suction truck.
4. Car wash as far as possible in a ventilated and cool place.
5. When washing the car, pay attention to the waterproof work of some parts of the fecal suction truck, such as the horn, car lights, etc., to avoid the failure of the horn or the fogging of the car lights.
6. Do not wash the car immediately after the fecal suction truck has been driven in summer to avoid engine damage. You should wait until the temperature of the fecal suction truck drops.
The above is the blue brand Tuyi 2.5-ton fecal suction truck. How much is it? If you want to know more model parameters, please call 139-9786-4934 [Manager Wang WeChat same number]
A lotion bottle is a type of container used to hold and dispense lotion, Plastic Lotion Containers,a type of skin care product. It is typically designed with a pump or squeeze mechanism to allow the user to easily access and apply the lotion.Lotion Bottle Plastic. The bottle can be made of various materials such as plastic or glass, and comes in different sizes, shapes, and designs. Some lotion bottles are also refillable, allowing users to buy larger quantities of lotion and refill the bottle as needed. This is not only cost-effective but also more environmentally friendly.
Lotion Bottle,Plastic Lotion Containers,Plastic Cream Bottle,Lotion Bottle Plastic
Kunshan Muchun Electric Co., LTD , https://www.muchunmanufacture.com