Heavy rainfall weather how to solve the problem

In recent days, heavy rains have occurred in most parts of the country. Some areas have even experienced severe flooding, which has caused many vehicles to have been flooded. Of course, even if it is a high-altitude truck, it cannot be spared. Then how do we solve the related problems after the high-altitude vehicle enters the water?

1. When high-altitude vehicles are involved in the wading process, there is a situation where the water is turned off and the water is turned off. The ignition switch should be turned off immediately. Never start the engine again. In the event of an opportunity, the vehicle can be parked in a front high and low position, so that the water entering the exhaust pipe can flow out and damage to the three-way catalytic converter and the muffler can be avoided.

2. If someone in the snorkeling car enters the compartment in the wading water, then when the vehicle is being repaired and maintained, it is mainly necessary to dispose of the stagnant water of the heavy truck. There are several underneath the chassis of the aerial working vehicle. After the sealer is blocked, open it and release the water in the compartment. However, because some of the materials decorated in the car have relatively strong water-absorbing properties, they should be dismantled. Place in a more spacious place, so that its moisture can be well evaporated. Then the air-conditioner of the aerial work vehicle was opened, and the circulation switch of the vehicle was adjusted to the inner circulation, so that the water vapor in the carriage could be discharged outside the vehicle through the air-conditioning system.

3, if the parts of the chassis of the aerial work vehicle after wading, it is relatively easy to lead to deterioration of the lubricant. In particular, some system performance aspects such as transmission, steering, etc. are involved. It is necessary to replenish the grease on the parts of the chassis of the aerial working platform after the wading, and it is also necessary to carefully listen to the chassis to see if there is any unusual ringing during the trial run.

This kind of stator paper inserting machine can meet the requirement of different paper and stator dimension. It makes the whole paper inserting process far more iconvinient than by manual. This machine can also be connected to Stator Production Line to meet the mass production requirement.

We have several types of paper inserting machine, the normal one, the servo inserting one, horizontal type one and other types. We could customize our machine as per customer's different requirement. For the horizontal type, it is suitbale for long and big stator which is not easy to do paper inserting. Besides, we also provide Wedge Inserting Machine, wedge cutting and forming machiine.

Stator Insulation Paper Inserting Machine

Insulation Paper Inserting Machine,Slot Insulation Machine,Slot Cell Insulating Machine,Motor Paper Inserting Machine

Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com