Electric Copper Wire Self-Priming Auto Water Pump with Switch Box
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application
                                                                    Â
Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump   Â
    Â
Item | Description | Item | Description | Item | Description | Item | Description |
11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
17 | O-ring | 27 | Terminal Box | 37 | O-ring | Â | Â |
18 | Screw | 28 | Screw | 38 | Fan | Â | Â |
19 | Front Plate | 29 | Capacitor | 39 | Screw | Â | Â |
20 | Screw | 30 | Terminal Box | 40 | Fan Cover | Â | Â |
Production Work-flow Chart of Pump
Â
                           About Us
                                 Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application
                                                                    Â
Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump   Â
    Â
Item | Description | Item | Description | Item | Description | Item | Description |
11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
17 | O-ring | 27 | Terminal Box | 37 | O-ring | Â | Â |
18 | Screw | 28 | Screw | 38 | Fan | Â | Â |
19 | Front Plate | 29 | Capacitor | 39 | Screw | Â | Â |
20 | Screw | 30 | Terminal Box | 40 | Fan Cover | Â | Â |
Production Work-flow Chart of Pump
Â
                           About Us
                                 Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Evotec Special Generator including Industrial Alternator ,Explosion-Proof Generator,Marine Generator With Ccs Certificate, Brushless Generator . Our alternator are widely used in industry, commercial, real estate, hospital, hotel, railway, telecommunications, data-centers and mining etc.
The specific technical features are listed below:
Speed: 1500rpm or 1800rpm
Frequency: 50 Hz or 60Hz
Number of Poles: 4
Power: up to 3500KVA
Voltage: 110V-690V,High Voltage:3.3KV-13.8KV
Insulation: class H
Power Factor: 0.8
Voltage Regulation Rate: ±0.5%
Altitude: 1000M
Temperature Rise Class: class H
Ambient Temperature: 40
Overload:10% for 1 hour in every 12 hours
Degree of Protection: IP21 (IP23, IP44, IP54 on request)
Special Features:
- higher motor starting capability
- a reliable long life with superior class H insulation
- high thyristor load withstand capability for mobile phone and telecom applications
- ease of maintenance with integrated components and outboard exciter/rotating rectifier
- wide range of coupling discs/adaptor for single bearing configuration, suitable for wide range of engine brands
Explosion-Proof Generator
Explosion-Proof Generator
Industrial Alternator ,Explosion-Proof Generator,Marine Generator With Ccs Certificate,Brushless Generator
EvoTec Power Generation Co., Ltd , https://www.evotecgen.com