Cold Steel Rolling Shutter Slat Door Panel Roll Forming Machine
Roller shutter door roll forming machine
1. Technical parameters:
Â
No |
Item |
Parameter |
Note |
|
1 |
Suitable  Material |
Type |
Steel sheet |
 |
Roller Shutter |
Thickness: 0.7-1.0 mm |
 |
||
2 |
Product Specifications |
Detail as the attached drawing |
||
3 |
Power Requirement |
Type |
380V/3PH/50HZ |
 |
Main motor power(KW) |
3 |
 |
||
Cutting power(KW) |
2.2 |
 |
||
4 |
Forming Speed(m/min) |
15-18 |
 |
|
6 |
Forming Stand |
12 |
Depend on actual design |
|
7 |
Forming Shaft Diameter(mm) |
65 |
Depend on actual design |
|
8 |
Type of Cutting |
Roll-formed and length-set cutting |
 |
|
9 |
Control System |
Mitsubishi PLC and inverter |
 |
|
10 |
Run Out Table |
2mX3 |
 |
|
11 |
Installation Dimension(m) |
8X1.5 |
Without the panel length |
|
12 |
Total Weight(T) |
8 |
Depend on actual design |
Â
The Machie View:
Â
Â
Laser Marking Machine,High Speed Laser Marking Machine,Food Packaging Bag Laser Marking Machine,Uv Laser Marking Machine
Herolaser , https://www.herolasermachine.com