China Science and Technology University realizes measurement-independent high-dimensional quantum guidance for the first time

[ Instrument Network Instrument Development ] Guo Guangcan, a member of the Chinese Academy of Sciences and a professor at the University of Science and Technology of China, made new progress in the study of basic problems in quantum mechanics. The laboratory Li Lifeng, Liu Biheng and others collaborated with Australian theoretical physicists to observe the first experimental observation. Device-independent high-dimensional quantum guidance and use it to generate private quantum random numbers. The research results were published on the International Physics Journal "Physical Review Letter" on October 23.
Quantum guidance is a type of quantum nonlocality between quantum entanglement and Bell nonlocality. It describes that local measurements on one particle in an entangled particle pair can affect another particle non-locally. The ability of the state. Quantum guidance has important applications in quantum information tasks such as quantum key distribution, quantum channel identification, and random number generation. This can lead to loopholes in quantum-guided experiments due to the limited performance of experimental equipment or the possibility of being manipulated by hostiles. Taking the quantum guidance of entangled photon pairs as an example, since the efficiency of a single photon detector is limited, undetected photons can in principle be utilized by potential adversaries, which makes the results of quantum pilot experiments unreliable. In order to solve this problem, theoretical physicists have designed a quantum refereed quantum-guided identification method. By introducing third-party arbitration, the quantum-guided experimental test becomes independent of the measurement equipment.
Inspired by this, Li Chuanfeng, Liu Biheng and others skillfully constructed a high-dimensional quantum-guided witness operator with no measurement equipment. The first experiment realized high-dimensional quantum guidance independent of measurement equipment. The research team used a parametric down-conversion process to prepare a series of high-fidelity three-dimensional entangled states on polarization and path degrees of freedom. Then the arbitrator sends a series of test requirements to the entangled parties, collecting the two-dimensional data test high-dimensional quantum guidance inequality, the test results up to 1.983 (0.002), far exceeding the classical theoretical limit of 1.37 in the three-dimensional case, confirming that these entangled states have quantum guidance characteristic. As an application, the research team further applied experimentally observed data to the generation of random numbers. Each entangled photon pair yielded a 1.106 (0.023) bit of private quantum random number, exceeding the theoretical limit achievable with two-dimensional entangled states (1 bit). Each entangled photon pair) fully demonstrates the advantages of high-dimensional entanglement in the process of quantum information.
This work is the first experimental attempt based on the high-dimensional system to measure the device-independent quantum information task, which will play an important role in the research of the basic problems of quantum physics and the measurement of device-independent quantum information processes.
The first author of the article is Guo Wei, a doctoral student at the Key Laboratory of Quantum Information of the Chinese Academy of Sciences. The research was supported by the Ministry of Science and Technology, the National Fund Committee, the Chinese Academy of Sciences, and Anhui Province.

Blow-suction Fume Extraction System

1. Blow suction fume extraction system is a ventilation air flow composed of blown air and inhaled air flow. Therefore, it is a dust removal method that can effectively control the spread of pollution sources. This dust removal method is installing exhaust inlets on two-span center column or single-span side column (wall) and air outlets on the opposite wall column to form a circulating air flow to drive the smoke and dust into the purification machine, consequently performing overall dust removal and purification in the workshop. This system occupies a small area and has obvious purification effect, which is suitable for the purification of smoke and smoke in more complex production workshops.

2. Moland Product Series

Portable Fume Extractor series: MLWF50, MLWF70, MLWF100, MLWF360, MLWF120, MLWF200, MLWF280-basic, MLWF280S, MLWF290, MLWF300, MLWF300A, MLWF350, MLWF350D, MLWF400, etc.

Stationary fume extractors: MLWF350-dust bucket type, MLWF500-6T, MLWF500-6T dust bucket type, MLWF500-9T, MLWF800, MLWF800-dust bucket type, MLWF1000, MLWF1500, MLWF2000, MLWF3000, MLWF3500, MLWF4000). The electric control cabinet can be seperated from main equipment for convenient operation when the main equipment is placed outdoors.

Grinding dust extractors: MLWF100D, MLWF150D, MLWF200D, MLWF320-DM, MLWF180, MLWF380, MLWF480) and grinding cabinet (MLWF900). The grinding cabinet is usally equipped with telescopic or fixed grinding room, to form a semi-closed space to control dust and smoke spread. It also improves the filtration efficiency with low air volume and energy consumption.

VOCs treatment

3. R&D

In order to provide advanced products, our R&D department develops 3 to 5 new products every year, and irregularly improves the performance, appearance, and installation methods of existing products.

4. Certification

All our products are approved by CE, ISO9001, ISO14001, utility model patent, design patent, Program copyright, etc.

5. Exhibition

Moland participates at least 5 industry exhibitions each year.

6. Central Fume Extraction System

1) Cantilever type fume extraction system

Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the Suction Hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.

2) Hood suction type fume extraction system

Cantilever dust removal can be used for manual welding conditions where the work stations are evenly distributed and the span is small. The smoke and dust generated by each welding station can be effectively absorbed at the dust generation point, and will not pollute other parts of the workshop. The skeleton of the suction arm is similar to a human arm and can hover in a space within a certain length. The outer layer of the suction arm is a temperature-resistant hose, which not only prevents the hose from being burned by sparks, but also ensures the flexibility of the movement of the suction arm. A unique rotating structure is designed on the position of the suction hood to ensure that the suction hood can be aligned with the welding position in any orientation, so that the suction arm can effectively capture the smoke and dust generated during the welding process. The advantage of the suction arm capture is that it can be close to the place where the smoke is generated, and the collection effect is better.

3) Room tupe fume extraction system

Room-type dust removal is suitable for the purification of fumes and smoke generated during the production of automated equipment, such as welding robots, welding machines, grinding, grinding and polishing of metal and plastic parts, drilling, thermal processing, cutting and crushing, stone processing, powder packaging, solid particles and various dusts and fumes produced by mixing and processing.

For working conditions such as robot automatic welding, circular seam and longitudinal seam welding, the smoke and dust purifier is installed with the robot workstation, so that the workstation has its own dust removal function. The fume and smoke are effectively collected through equipment components such as pipes and dust hoods. The room-type design prevents the volatilization and diffusion of smoke to keep the air in the workshop clean.

The working conditions with moderate welding workpieces and large amounts of dust and smoke are suitable for room-type treatment solutions. The room type centralized dust dedusting solution is divided into side suction and top suction method dust collecting ways. The appropriate solution can be designed according to the site conditions and treatment goals.

4) Blow suction type fume extraction system

Blow-suction type dust removal solution is a ventilation air flow composed of blown air and inhaled air flow. Therefore, it is a dust removal method that can effectively control the spread of pollution sources. This dust removal method is installing exhaust inlets on two-span center column or single-span side column (wall) and air outlets on the opposite wall column to form a circulating air flow to drive the smoke and dust into the purification machine, consequently performing overall dust removal and purification in the workshop. This system occupies a small area and has obvious purification effect, which is suitable for the purification of smoke and smoke in more complex production workshops.

7. Company information

Jinan Moland Environmental Tech Co., Ltd., is located in No. 11889 Jingshi West Road, Changqing District, Jinan City, Shandong, China, established in 2016. It`s an environmental protection technology enterprise specializing in research, development, manufacture and sale of efficient smoke purification systems.

The company is committed to reducing the environmental impact of production process, protecting workers from harmful gases and dust, and creating a cleaner working environment. At present, the company′s products have been successfully applied in automobile, railway, construction machinery, marine engineering, aviation and other mechanical processing industries, as well as new materials, grain, wood, recycled resources processing and other industries. The company has passed the ISO 9001 quality management system certification, obtained the certification of China Environmental Protection Products issued by China Environmental Protection Industry Association, and CE certification of EU. It also has a number of invention patents, utility model patents and appearance patents. Through continuous R&D and innovation, many products of the company have reached the international leading level.

Moland′s environmental services cover the whole process from project design, product manufacturing to installation, commissioning and after-sales service. We will provide you with the most professional governance program and the best quality service.

Blow Suction Type Dust Removal Solution,Blow Suction Fume Extraction System,Fume Extraction System,Industrial Dust Collection Solution

Shandong Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com