Car owners please note: professional knowledge of car interior maintenance
Professional interior care includes three parts: full-vehicle cleaning, leather protection and steam sterilization.
All-in-vehicle cleaning: It strictly follows dust removal, cleaning, and maintenance trilogy to thoroughly clean and comprehensively maintain instrument control panels, ceilings, rear cylinder platforms, seats, ground cashmere, and interior door panels. The whole process consists of four staff members. It takes about two and a half hours to operate. In the cleaning process, neutral or weakly acidic cleaners are used. The residues are free of harmful gases and volatilize automatically within seconds. They are safe and environmentally friendly and will not cause any harm to the human body.
Leather protection: Professional car beauty shop is equipped with a complete set of leather care tools, using different tools for different parts of the operation. In addition, the professional leather protection has certain requirements for the dosage of cleaning agent and maintenance agent, because the excess liquid agent will remain on the surface of the leather adsorbed dust in the air, polluting the car environment.
Steam Sterilization: In addition to the comprehensive high-temperature sterilization of the air in the vehicle, the professional steam sterilization also focuses on the disinfection of air-conditioned air outlets, seats, and ground naps, which are likely to accumulate dust and bacteria. Kill locusts, molds and microorganisms that are invisible to the naked eye to protect the health of the family and yourself. At the same time, it will not cause damage to the car interiors and will not cause secondary pollution to the environment.
Instrument control board: The instrument control board is the easiest to accumulate dust, and there are a lot of dead angles. The owner can use the brush to clean himself, brush the dashboard, air conditioning air inlet, switches, buttons etc. every day to prevent dust accumulation and difficult to remove. If the instrument control panel is dirty, spray it with a special dashboard cleaner and wipe it with a clean, soft cloth. After cleaning, you can spray a layer of table wax.
Ceiling: The ceiling is a place that is easily overlooked. Once cleaned, there is bound to be liquid residue dripping on the seat or carpet. American car decoration experts recommend: usually owners can use the vehicle vacuum cleaner dust, wait until the car beauty shop to do a comprehensive interior maintenance and then thoroughly clean the roof.
After cylinder platform: We usually put tissue boxes, dolls, pillows and other debris stacked on the rear cylinder platform, and paper towels, pillows often be used by people sitting in the car, so the rear cylinder platform cleaning, dusting is also sloppy Not allowed. The cleaning method can refer to the instrument control board.
Seat: The seat is the interior part that the owner touches the most and most easily stained, so the maintenance of the seat, the first is the cloth seat cover on the seat cover, and an additional set, ready to replace the cleaning. The second is to avoid spilling food or liquids on the seats, especially alcoholic or flavorful items. Once stained, the stains will be difficult to remove if they are not cleaned within 12 hours. The third is to avoid scratching the leather surface with metal objects. The fourth is the regular use of leather cleaners and maintenance agents for cleaning and maintenance, to prevent leather aging, discoloration, cracking. Experts recommend that car leather trims be cared for every six months.
The ground cashmere: When the local cashmere is dirty, because it can not be removed from the car, it brings great difficulties to the cleaning work. Therefore, the average owner chooses to go to a professional auto-cosmetics shop for cleaning, and usually lays a pad on the cashmere. For easy daily cleaning. The foot pad must be squeezed out after it has been cleaned. The professional car beauty shop has a dedicated pad machine, and the cleaning pad is quick and clean.
Inner door panel: The main stains on the inner door panel of the car are shoe prints, and all are concentrated on the lower edge of the door panel. Usually, pay more attention and always clean. The owner can use a professional foam cleaner to clean it, and then wipe it with a clean, soft cloth.
China Js500 Concrete Mixers,Js Concrete Mixer manufacturer, choose the high quality Js500 Electrical Concrete Mixer Machine,Js Horizontal Axle Mixer, etc.
The advanced hydraulic driving equipment avoid that the m1x1ng plant can't discharge because of the shortage of the pneumatic when the pneumatic doors is unloading .There are serval arrest point to be general switch on the unloading gate so that it is convenient to pour into the mixer.It is safe and reliable that double unloading way can work with manual discharging control when the power outage.
Js500 Concrete Mixers,Js Concrete Mixer,Js500 Electrical Concrete Mixer Machine,Js Horizontal Axle Mixer
Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.sdmobileconcretebatchingplant.com