Bread refrigerated truck - bread refrigerated truck price - small bread refrigerated truck

A bread refrigerated truck is a closed van transporter used to transport frozen or fresh-keeping goods. The refrigerated truck is a refrigerated special transport vehicle equipped with a refrigeration unit and a polyurethane insulated box. The refrigerated truck can be used by the manufacturer and the chassis. Classification by bearing capacity and compartment type.

Bread refrigerated trucks are commonly used to transport frozen food (frozen cars), dairy products (milk transport vehicles), vegetables and fruits (fresh freight transport vehicles), vaccine drugs (vaccine transport vehicles) and so on.

The bread refrigerated truck consists of the walking part of the special car chassis, and the heat insulation car body (generally composed of polyurethane material, glass steel, color steel plate, stainless steel, etc.), refrigeration unit, cabin interior temperature recorder and other components, for special requirements of the vehicle. Such as meat hook car, can be added with meat hooks, waist, aluminum rails, ventilation slots and other optional parts.

Futian G7 country five bread refrigerated truck

Vehicle configuration: Futian New Landscape G7 luxury body, Foton 130 HP five gasoline engine, 5- speed gearbox, direction assist, air conditioning, load-sensing proportional valve

Standard: 2930x1360x1450 box size is approximately 5.6 square, 8 cm thickness of the envelope. The inner and outer plates are made of special glass fiber reinforced plastic for refrigerated trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, and the fireproof and flame-retardant heat-insulating large-ton 1000-ton press is pressed. The cabinet is made of stainless steel locks and stainless steel. Wrap angle, stainless steel door frame with ceiling light and bumper block. Our factory's refrigerated and insulated car insulation materials use imported grade XPS , water absorption rate ≤ 1 , thermal conductivity ≤ 0.028W/mk, compressive pressure ≥ 150Kpa, density 30 ~ 45kg/m3 , using the most advanced fifth-generation fully enclosed polyurethane in the world. Plate bonding structure, the surface material of the panel is made of glass fiber reinforced plastic, stainless steel, aluminum alloy, color steel plate and other materials. The car body has the advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the vehicle's center of mass is reduced and the effective volume is increased. After testing, the integrated energy of the vehicle, the life of 1 to 2 times higher than the average Refrigerated compartment.

Jinbeiguowu 5.6 side pack refrigerated truck

Chassis configuration: Mianyang Mali Guo Chen five engine power 110, 5-speed gearbox, brake oil, a cab air conditioner with the original, the direction of power, displacement 2.02, steel tire 195, 2590 wheelbase, ABS.

Refrigeration units: the car uses Chinese-made snow (overhead refrigeration unit refrigeration effect is good, fast cooling, lowest temperature of minus 15 degrees to zero can be adjusted, excellent quality of the brand unit, sale Genius.

Standard configuration: The box size is: length 2 90 0 * width 1380 * height 1450 is about 5.6 cubic meters. The inner arc of the car . The inner plate is made of special glass fiber reinforced plastic for refrigerating trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, and the fireproof flame-retardant heat insulation is pressed by a large 1000-ton press. The cabinet is made of stainless steel locks and stainless steel. Wrap angle, stainless steel door frame with ceiling light and bumper block. An aluminum alloy air guiding groove can be added, and the air guiding groove can evenly blow the cold air to the bottom of the car body. Our factory's refrigerated and insulated car insulation materials use imported grade XPS , water absorption rate ≤1 , thermal conductivity ≤0.028W/mk, compressive pressure ≥150Kpa, density 30 ～ 45kg/m3 , using the most advanced fifth-generation fully enclosed polyurethane in the world. Plate bonding structure, the surface material of the panel is made of glass fiber reinforced plastic, stainless steel, aluminum alloy, color steel plate and other materials. The car body has the advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the vehicle's center of mass is reduced and the effective volume is increased. After testing, the integrated energy of the vehicle, the life of 1 to 2 times higher than the average Refrigerated compartment.

This model is in line with the standard of the blue card, can be on the blue card, C certificate can be opened, can enter the urban area

Futian IX5 country five 2 side package refrigerated truck

Vehicle configuration: Fukuda wind SUV body gamma way, 115 hp 1.5 States five displacement gasoline engine, 5-speed transmission, with the original air-conditioning the cabin, the direction of power, electric window, central locking, key fob, 185 vacuum tire.  

Standard configuration: The cabinet size is 1600 x1 20 0x1 02 0 about 2 squares . Inner arc-shaped car body, inner and outer plates are made of special glass fiber reinforced plastic for refrigerated trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, (fire-retardant and heat-insulating), large-scale 1000-ton press is pressed, and the configuration box The body is all stainless steel locks, stainless steel wrap angle, stainless steel door frame, with ceiling lights and anti-collision blocks. Our factory's refrigerated and insulated car insulation materials use imported grade XPS , water absorption rate ≤ 1 , thermal conductivity ≤ 0.028W/mk, compressive pressure ≥ 150Kpa, density 30 ~ 45kg/m3 , using the most advanced fifth-generation fully enclosed polyurethane in the world. Plate bonding structure, the surface material of the panel is made of glass fiber reinforced plastic, stainless steel, aluminum alloy, color steel plate and other materials. The car body has the advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the vehicle's center of mass is reduced and the effective volume is increased. After testing, the integrated energy of the vehicle, the life of 1 to 2 times higher than the average Refrigerated compartment.

 

Vehicle configuration: Iveco Sophie 130 horsepower five diesel engine, V35 type Turbo Daily series, single row, rear single tire, ABS, front solid disc rear disc brake, fuel tank: 70L , rear double door, cargo compartment all blind Window, 110A motor, electric glass, 4KW air conditioner, 215R16LT tire, Iveco 2826.5 gearbox, emission: Guowu

 

Standard configuration: The cabinet size is 2 10 0x1 58 0x14 8 0 about 5 squares. The inner and outer plates are made of special glass fiber reinforced plastic for refrigerated trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, and the fireproof and flame-retardant heat-insulating large-ton 1000-ton press is pressed. The Decorated With Classical Illuminated Ceiling Fans

This ceiling fan includes not only modern ceiling fans with light, but also classic ceiling fans with light. What's more, this ceiling fan will not disturb everyday life, as it has a silent motor and remote control, ensuring simpler control. This ceiling fan will make the place more beautiful.

There are lamp decorative ceiling fans, decorative ceiling fans with blades, light decorative ceiling fans, ceiling fan ornaments

ZHONGSHAN UFAN ELECTRIC APPLIANCE CO. LTD , https://www.retractablefan.com