Automatic T5 T8 LED Lampshade Plastic Extrusion Production Machinery

Automatic T5 T8 LED lampshade plastic extrusion production machinery






Our Features and advantages in led lampshade extrusion


(1) Newly developed online precise cutting technology, one-time cutting online, no need the second time cutting, cutting precision within 0.5mm, cut end neat, chipless, higher efficiency;

(2) Special screw for PC material, perfect plastication effect, to ensure the finished products without crystalized dot, without pulling mark, without vibration mark, with high light transmittance, and high transparency.  


Simple introduction of T5 T8 LED lampshade plastic extrusion production machinery


1. The machine is used to produce various T5, T8 LED PC tube, PC profile, transparent LED lampshade, single color or double color led lampshade etc;

2. Applied materials: PC OR PMMA as per clients requirements. 


Composition & technical details of T5 T8 LED lampshade plastic extrusion production machinery


 









1.  Single screw extruder machine:


(1) Screw model: YJ45, YJ50, YJ55, YJ65 available for option; L/D: 28:1; 

Separated type screw is adopted as it is especially suitable for transparent material mixing diffuser material for production, so as to lower down raw materials cost largely. 

(2) Siemens motor drive, with enough motive power and quite stable in running; Temperature control meter: intelligent type; the precision could reach +/-1 degree; 







2. Extruding die: 


Special S136H mirror surface steel for dies, the surface of the extruding dies is mirror polished.


3. 3D calibration tank: 


Stainless steel tank;
3D adjusting machine frame, with10-way vacuum, 10-way cooling water;
vacuum pump fixed outside;
the whole machine is compact and strong without vibration.

Length: 1.5m, 2m, 2.5m, 3m for option;

Vacuum pressure: 0.01~0.08MPA, adjustable;
Vacuum pump power 1.5KW;
Vacuum is stable and silent.


4. Belt type tractor machine:


Open-close, up-down adjusting;
belt workable length 1meter,constant stable tractor;
high wear-resistant foamed surface PU multi-wedge belt;
high precision frequency conversion controller;
tractor speed 0-15m/minute stepless adjustable.
Single motor or double motor available for option;
Power: 1.5~3KW.  


5. Automatic online precise cutter with collection stand:


Innovative cutting technology;
Optical type length-setting device;
Solve the online-precise-cutting difficulty in this industry;
Online cutting precision: within 0.5mm;
Cut end neat, without powder and dust;
No need the second time precise cutting;
Fully touch screen control;
Originally created active servo tracing cutting platform.   


T5 T8 LED lampshade plastic extrusion production machinery shipment:








How is your service system? 


 


Why choose CREATION GLORY MACHINERY? 


1. Technology: Extrusion technology is critical in plastic product extrusion production, we own leading extrusion technology in producing various plastic products including pipe, profile, filament and strip, tape etc, so as to help our clients set up plastic extrusion whole plant for producing various plastic extrusion products successfully and stably; 

2. Experience: With our almost 20 years experience in plastic extrusion industry, we not only help our clients with design of whole extrusion production line, but also sourcing plastic raw materials suppliers, suggesting auxiliary equipments needed etc; 

3. Professionality: Specialized in plastic extrusion production line design and manufacturing for more than 10 years, we are serving lots of big and small companies in China and also over the world, including many listed companies. 

4. Quality: The quality of products is footstone of enterprise's constant development, always endeavoring to do much better, quality comes first, developing & innovative is our responsibilities; 

We always care quality of each and every small part of the machines, and keep improving design and structure of whole line, so that our clients could get the production lines in good quality, with excellent performance, stable running and also with long life. 







FAQ


Q1: What is your guarantee of the machine? 
A1: The guarantee period of our machine is 12 months; 

Q2: What package do you use for the machine? 
A2: Painted the machine with anti-corrosion oil, and then covered with plastic film, and then packed into wooden case or fixed onto wooden pallet as per clients' requirements, or shall be loaded into container in nude packing. 

We place and fix the machines well into container and check carefully before closing the container
so as to ensure everything is well for the shipment. We care each and every point so that our clients could receive the machines in good status.    

Q3: What is delivery time of the machine? 
A3: About 45 working days; 

Q4: What is your payment terms? 
A4:  30% advance payment by T/T upon order, balance 70% by T/T before shipment OR by L/C; 

Q5: Which countries do you sell your machines to? 
A5: Our plastic extrusion machines were sold to Russia, Ukraine, South Korea, Thailand, Malaysia, Vietnam, India, Bangladesh, Canada, USA etc countries.  

Q6: Do you have instruction manual to guide us if i buy the machine? 
A6: Yes, we supply detailed user manual for your reference. PLS read it for guide. If there is still problem which could not be solved, PLS contact us, we are ready to help you anytime. 

Q7: What is your service to overseas clients? 
A7: We supply perfect overseas service. We shall send engineers to overseas for machine installation and commissioning and test production guide, and also training to the workers of the buyer. And we are ready to give technical support anytime. 

Q8: What is your contact details? 
A8:  PLS contact belows: 
   Automatic T5 T8 LED lampshade plastic extrusion production machinery






Our Features and advantages in led lampshade extrusion


(1) Newly developed online precise cutting technology, one-time cutting online, no need the second time cutting, cutting precision within 0.5mm, cut end neat, chipless, higher efficiency;

(2) Special screw for PC material, perfect plastication effect, to ensure the finished products without crystalized dot, without pulling mark, without vibration mark, with high light transmittance, and high transparency.  


Simple introduction of T5 T8 LED lampshade plastic extrusion production machinery


1. The machine is used to produce various T5, T8 LED PC tube, PC profile, transparent LED lampshade, single color or double color led lampshade etc;

2. Applied materials: PC OR PMMA as per clients requirements. 


Composition & technical details of T5 T8 LED lampshade plastic extrusion production machinery


 









1.  Single screw extruder machine:


(1) Screw model: YJ45, YJ50, YJ55, YJ65 available for option; L/D: 28:1; 

Separated type screw is adopted as it is especially suitable for transparent material mixing diffuser material for production, so as to lower down raw materials cost largely. 

(2) Siemens motor drive, with enough motive power and quite stable in running; Temperature control meter: intelligent type; the precision could reach +/-1 degree; 







2. Extruding die: 


Special S136H mirror surface steel for dies, the surface of the extruding dies is mirror polished.


3. 3D calibration tank: 


Stainless steel tank;
3D adjusting machine frame, with10-way vacuum, 10-way cooling water;
vacuum pump fixed outside;
the whole machine is compact and strong without vibration.

Length: 1.5m, 2m, 2.5m, 3m for option;

Vacuum pressure: 0.01~0.08MPA, adjustable;
Vacuum pump power 1.5KW;
Vacuum is stable and silent.


4. Belt type tractor machine:


Open-close, up-down adjusting;
belt workable length 1meter,constant stable tractor;
high wear-resistant foamed surface PU multi-wedge belt;
high precision frequency conversion controller;
tractor speed 0-15m/minute stepless adjustable.
Single motor or double motor available for option;
Power: 1.5~3KW.  


5. Automatic online precise cutter with collection stand:


Innovative cutting technology;
Optical type length-setting device;
Solve the online-precise-cutting difficulty in this industry;
Online cutting precision: within 0.5mm;
Cut end neat, without powder and dust;
No need the second time precise cutting;
Fully touch screen control;
Originally created active servo tracing cutting platform.   


T5 T8 LED lampshade plastic extrusion production machinery shipment:








How is your service system? 


 


Why choose CREATION GLORY MACHINERY? 


1. Technology: Extrusion technology is critical in plastic product extrusion production, we own leading extrusion technology in producing various plastic products including pipe, profile, filament and strip, tape etc, so as to help our clients set up plastic extrusion whole plant for producing various plastic extrusion products successfully and stably; 

2. Experience: With our almost 20 years experience in plastic extrusion industry, we not only help our clients with design of whole extrusion production line, but also sourcing plastic raw materials suppliers, suggesting auxiliary equipments needed etc; 

3. Professionality: Specialized in plastic extrusion production line design and manufacturing for more than 10 years, we are serving lots of big and small companies in China and also over the world, including many listed companies. 

4. Quality: The quality of products is footstone of enterprise's constant development, always endeavoring to do much better, quality comes first, developing & innovative is our responsibilities; 

We always care quality of each and every small part of the machines, and keep improving design and structure of whole line, so that our clients could get the production lines in good quality, with excellent performance, stable running and also with long life. 







FAQ


Q1: What is your guarantee of the machine? 
A1: The guarantee period of our machine is 12 months; 

Q2: What package do you use for the machine? 
A2: Painted the machine with anti-corrosion oil, and then covered with plastic film, and then packed into wooden case or fixed onto wooden pallet as per clients' requirements, or shall be loaded into container in nude packing. 

We place and fix the machines well into container and check carefully before closing the container
so as to ensure everything is well for the shipment. We care each and every point so that our clients could receive the machines in good status.    

Q3: What is delivery time of the machine? 
A3: About 45 working days; 

Q4: What is your payment terms? 
A4:  30% advance payment by T/T upon order, balance 70% by T/T before shipment OR by L/C; 

Q5: Which countries do you sell your machines to? 
A5: Our plastic extrusion machines were sold to Russia, Ukraine, South Korea, Thailand, Malaysia, Vietnam, India, Bangladesh, Canada, USA etc countries.  

Q6: Do you have instruction manual to guide us if i buy the machine? 
A6: Yes, we supply detailed user manual for your reference. PLS read it for guide. If there is still problem which could not be solved, PLS contact us, we are ready to help you anytime. 

Q7: What is your service to overseas clients? 
A7: We supply perfect overseas service. We shall send engineers to overseas for machine installation and commissioning and test production guide, and also training to the workers of the buyer. And we are ready to give technical support anytime. 

Q8: What is your contact details? 
A8:  PLS contact belows: 
  

Pneumatic Two Component Sealant Extruder

pneumatic Two Component Sealant Extruder is one manual sealant spreadin machine for insulating glass.Machine is one economic type,but after finish job,need clean the glue gun and glue pipe avoid machine blocked.

Machine having the following feature:The machine`s main parts (including A and B component glue pump,gelatinize gun and safety valve) are imported from Korea, or made of high-tension and high-quality stainless steel with thermal treatment, the reliability and durability of the machine is greatly improved.The key parts of ST06 are original parts of world famous brand YLK brand in Korea,The curing agent hydraulic system is equipped with two filtering devices to improve the mixing uniformity and curing performance of the two components the basic pump, curing pump and proportional high-pressure valve port of the gluing machine are made of special alloy with zero leakage.

Sealant Spreading Machinery,Insulating Glass Sealant Spreading Machinery,Sealant Spreading Extruder,Insulating Glass Silicone Machine

JINAN WEILI MACHINE CO LTD , https://www.wlglassmachine.com