5% Purge Air Biteman Modular Desiccant Air Dryer (-20º C PDP)

Model NO.: Biteman C-series heatless, 1.5 to 46.5m3/min
Type: Vacuum Rake
Flow Range: 8.5m3/Min, 300cfm
Modular Units Desiccant Chamber: Replaceable Factory Filled Desiccant Chamber
Pressure Dew Point: Minus 20 Centigrade Degree
Heat or Heatless: Heat
Trademark: BITEMAN
Transport Package: Wooden Case
Specification: 560*250*1700
Origin: Shenzhen China
BITEMAN Modular units heatless desiccant air dryer

5% Purge Air Biteman Modular Desiccant Air Dryer (-20º C PDP)


Unique features
-Less than 5% purge air without auxiliary equiment,012KW power consumption
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccan chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -20C (-4F) is ensured
-The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
5% Purge Air Biteman Modular Desiccant Air Dryer (-20º C PDP)


Details of advantages

Innovative structure with patents,employs small desiccant chamber unit

1.Air flow equally and evenly pass through each desiccant chamber
2.Avoid channelling effect which more likely happens in traditional desiccant dryer
3.Small chamber allow no mandatory annul inspection
4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
5.PLC controller ,Full function touch panel control

Structure and operation

Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration

5% Purge Air Biteman Modular Desiccant Air Dryer (-20º C PDP)




Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory
5% Purge Air Biteman Modular Desiccant Air Dryer (-20º C PDP)




 

Synthetic Sleeper

Plastic Railway Sleeper,Synitheric Sleeper,Railway Glass Fiber Sleepers,Plastic Railway Sleepers

Anyang Railway Equipment CO.,Ltd , https://www.ayrailway-at.com