Upward horizontal stratified dry filling mining method filling purpose and process

1) The main purpose of filling is to use the filling material to support two sets of surrounding rock and a workbench as a worker.

Filling is required after each layer is taken, otherwise the height of the empty area after the completion is increased, which is inconvenient for mining operations and unsafe.

2) Filling process——After the mining situation, after completing a preparatory work (such as pouring partition wall, heightening the mine and smoothing the patio, etc.), then filling the filling from the filling well to the mine, the filling volume is designed. Stop at the required height, flatten the surface, and then lay a layer of concrete floor. At this point, the filling work is over and the next new cycle can begin.

3) Materials used for dry filling - use waste rock, that is, waste rock excavated underground, or open a special quarry to dig waste rock

For the filling block requirement: the block size should not be too large, generally not more than 300-350mm, and the difficulty in transportation.

It is required that the sulfur content in the filling material should not be too high, and the amount of yellow sand contained should be small, and other substances containing cohesiveness should be less.

Swimming Pool Test Kit

Urea, also known as carbamide, is an organic compound composed of carbon, nitrogen, oxygen and hydrogen. It is one of the important standards to measure the water quality of swimming pools. In swimming pool water, sweat and urine discharge will increase the content of urea in the water, which affects the water quality. Through the test of urea test paper, the balance of urea value can be maintained, to avoid ammonia in urea and chlorine-containing disinfectant in water reaction, the formation of chloramines, so as to protect the health and safety of swimmers. The urea content in pool water should be less than or equal to 3.5 mg/l (national standard).

Urea test strips. By using urea test strips to make sure the urea value in the water is within normal range, and to protect your health.

Pool & Spa Test Strips 6 in 1. Get following 6 parameters: total hardness, free chlorine, total chlorine, cyanuric acid, total alkalinity and pH within 30 seconds.

Swimming Pool Test Kits,5Way Pool Test Strip,Water Test Strips 3 In 1,Ph Pool Test Strips

Jilin Test Bio-Electron Co., Ltd , https://www.tst-check.com