Taizhou: Belt sludge drying incinerator kills 30 tons of sludge every day
After entering the wastewater treatment site at Luqiao Sewage Treatment Co., the reporter saw two workers throw a spatula-like thing into a gray “big guy†and, as a result, the “big guy†emerged from the flames. This strange "big guy" is a belt-type sludge drying incinerator that exclusively "eats" the sludge.
According to Zhang Jinhua, after the dry incinerator with a length of 26 meters, a height of 4.8 meters and an area of ​​300 square meters began to operate, the sludge was sent to the upper filter belt along with the spiral conveyor belt, and then passed through the middle and lower belt respectively. At the time, the water content of the sludge was reduced from 80% to below 25%, and then it was made into mudballs by the machine and placed in the furnace to be burned. The heat generated by the combustion was returned to the dryer cabin. Dry the remaining damp sludge. In order to prevent the smoke from polluting the environment, the discharged exhaust gas is treated by a cyclone and a biological deodorizing spray washing tank, and then discharged through a chimney to achieve a harmless treatment of the sludge.
"Our company can recover 30 tons of sludge per day on average. The sludge that is produced every day is burned through the drying incinerator." Zhang Jinhua told reporters that after burning every 100 tons of sludge left only 6 tons of dust-like residues . At the same time, since the temperature in the incinerator is as high as 800 degrees Celsius, all pathogens and pathogens are completely killed, and toxic and harmful organic residues are also oxidized and decomposed.
It is reported that this time, Zhang Jinhua's belt drying incinerator integrated with drying and incineration is at the leading level in the same industry in China. It will not only cause secondary environmental pollution in landfills, but also save sludge in one year. 15 acres of land for landfill.
CNI fiber optic spectrometers with the characteristics of compact and portable design, plug and play, easy operation and Spectral Analysis 5.0 software downloads, can replace the old spectrophotometers. They are widely used in Laser wavelength and line width measurement and also the laser excitation fluorescence, Raman and LIBS spectrum measurement.
Fiber optic Spectrometer with the advantages of modularization and flexibility of its measuring system is widely used to measure wavelength and line width of laser, LED and common light source, can accurately obtain the spectral characteristics of the light source which is being tested. CNI developed spectrometers with the characteristics of compact and portable design, plug and play, easy operation and Spectral Analysis 5.0 software downloads, which are extensively applied on the fields of scientific research, teaching, industries and many other applications. CNI can also customize the wavelength and resolution of the spectrometers according to different customers` demands.
High Resolution Spectrometer
Aurora 4000
High Sensitivity Spectrometer
Sunshine
Compact Spectrometer
Firefly 4000
Multi- channel Spectrometer
Rainbow series
Resolution is up to 0.1nm (FWHM)
Application: Laser wavelength
analysis; LED sorting; Chemical,etc
Quantum effciency is up to 80%
Application:Raman spectrum;
Semiconductor processing, etc
Compact and portable design
Application: Laser wavelength
analysis; Biochemical analysis, etc
That is made features of wide
spectral rang and high resoultion,
with synchronous delay device
Components & Accessories
HLS-1000 Halogen Tungsten
Light Source
TG series External Trigger Box
Fiber Holder
Fiber
Optical Signal Collector
4 Way Cuvette Holder
Sample Spectrum
Optical Fiber Spectrometer,X Ray Spectrometer,Fiber Optic Spectrometer,Optic Fiber Spectrometer
Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.lasersciences.com