Sw-38A Dual Head Pipe Bending Machine

1.Product Description

2.Specification3.Feature

1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.

2. As it is controlled by microcomputer, it is easy to operate and maintain it.

3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.

4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.

5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.

6. One or two tubes can be bent in one time according to its size, material and outer diameter.

 

Standard accessories

1. One pair of mould, one set of retaining device

2. One set of common tools

3. The head can turn for 90° inside and outside
4.Selection guide

5.Similar product


6.Company information

Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press.

Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.


7.Parts brand


8.Contact details
Contact:Miss Ashley
Tel.:0086-512-56395618
Mob.:0086-13812981703
 
Website:www.zjgly.net/en

1.Product Description

2.Specification3.Feature

1. It can be divided into standard type (SW38) and rotary type (SW38A) according to structure of the base. The head of the rotary type bender (SW38A) can adjust the angle of elbow freely, but it shall consider the material feed problem.

2. As it is controlled by microcomputer, it is easy to operate and maintain it.

3. It can be operated full circularly or semi circularly and can be used for the volume production of symmetrical products at both sides.

4. The head of machine on the left and right can be adjusted rapidly and they are securely fastened. During bending, the center distance of two shafts will not deflect easily.

5. The bending angle can be adjusted with high precision and it meets the requirements of strict standard.

6. One or two tubes can be bent in one time according to its size, material and outer diameter.

 

Standard accessories

1. One pair of mould, one set of retaining device

2. One set of common tools

3. The head can turn for 90° inside and outside
4.Selection guide

5.Similar product


6.Company information

Zhangjiagang Liye Machinery Co., Ltd. (hereinafter referred to as the "Company") is specialized in manufacture of machining equipment for metal pipes. The Company covers an area of more than 10,000 m2 with total assets of over CNY 20 million. The main products include 9 series and over 100 models, i.e. pipe machining line, pipe cutter, pipe bender, pipe end forming machine, chamfering machine, gear grinding machine, riveting machine, arc machine and bending press.

Our  company is an entity factory.The company has a mature team about production, product research and development,  and product inspection.Our products update faster .We can design or improve new type of machine to meet different customer needs.


7.Parts brand


8.Contact details
Contact:Miss Ashley
Tel.:0086-512-56395618
Mob.:0086-13812981703
 
Website:www.zjgly.net/en

Metal Body Square Water Cooling Tower

This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results.

The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.

The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.

The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.

Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.

When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.


The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).

The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.

When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.

Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com