Structure and use of cold and heat shock test box
The hot and cold impact test box is used to make product test structures and complex materials. It instantly circulates extremely high temperatures and extremely low temperatures. Products change at high and low temperatures in a short period of time, and the products are tested under high and low temperature conditions. Tolerate the degree of chemical change or physical damage caused by thermal expansion and contraction in a short time. The objects of use include metal, plastics, rubber, electronics and other necessary test equipment for the material industry. They are used to test material structures or composite materials, and test equipment necessary for the material industries such as metals, plastics, rubber, and electronics to test the material structure or Composite materials can serve as a basis or reference for product improvement.
The hot and cold impact test box is divided into three box type and two box type. The three box type hot and cold impact test box is divided into three parts: high temperature zone, low temperature zone, and test zone. The temperature in high temperature zone or low temperature zone passes through the impact. The high pressure cylinder drive enters the test area for temperature shocks to achieve temperature polycondensation. The high-temperature zone and the test zone were tested for preservation of temperature during high temperature, and the low-temperature zone was closed. When the low temperature zone is tested, the temperature cycle is maintained during the low temperature period and the test zone, and the high temperature zone is closed. Test products are dynamic.
The two-box cold and hot shock box is divided into two parts: the high-temperature zone and the low-temperature zone. The sample is placed in the basket. When the basket is impacted, the test product is moved to the high temperature zone or the low temperature zone for impact. The test product is a dynamic type.
The system can do automatic cycle impact or manual selection of impact. The cooling system adopts two cooling systems. The cooling effect is fast and the cooling mode is water-cooled or air-cooled.
Highest temperature and lowest temperature
High temperature: 150°C
Low temperature: F type -40°C ~ 150°C X -55°C ~ 150°C S -65°C ~ 150°C
Test chamber temperature range
Test high temperature zone temperature range: 60°C ~ 150°C Test zone cryogenic temperature range: -10°C ~ -40°C
Exposure time
High temperature exposure time: +60°C ~ 150°C 30 minutes
Low temperature exposure time: -10°C (F-40°C X-55°C S-65°C) for 30 minutes
Regenerative tank heating time: RT ~ 200°C Approx. 45 minutes
Cooling tank cooling time: RT ~ - 75°C about 100 minutes
Temperature recovery time/transmission time: ≦5min/≦5sec
Temperature Control Accuracy/Distribution Accuracy: ±0.5°C/±0.2°C
Defrost function
Automatic/manual defrosting can be set
Internal and external materials
Inner material is 304 stainless steel The outer box material is stainless steel or cold rolled steel sheet paint.
Insulation material is rigid foam and glass wool
cooling system
Original German Bisel semi-enclosed compressor (water-cooled)
Original French Taikang Brand Sealed Compressor (Air-cooled)
Safety protection device
No fuse switch, compressor high and low voltage protection switch, fault warning system, electronic alarm
Power AC380V 50/60HZ
Exterior Door Handle For Infiniti
Exterior Door Handle for Infiniti
Exterior car door handles lets you access your car`s cabin. without them, doors are hard to open. Exterior door handles come in various shapes and styles but the operation is generally the same; pulling the lever out releases the hook from the vehicle frame`s latch.
Here are some types of OE replacement exterior car door handles: pull up, pull out, and trigger.There are two main materials used in manufacturing exterior door handles-plastic and metal.
Both materials come with different finishes, such as smooth black, textured, chrome and primed. Textured handles offer better grip even when wet, while smooth black and chrome blends with the color of your car. Primed handles are ready-to-paint pieces, which are perfect if you want to match your vehicle`s unique color.
These application-specific parts are made to look like and seemlessly replace exterior door handles, reinforcement brackets, and more.
- Stock Appearance: these replacement exterior door handles were specifically designed to look and function the same as the original handle on particular vehicles, and to match the original dimensions and specifications
- Great Value: OE quality at a lower price.
Exterior Door Handle For Infiniti,Infiniti Outside Exterior Door Handle,Fx35 Outer Handle Replacement,Infiniti Outside Handle Broken
RUIAN XINGTING AUTO PARTS CO.,LTD , https://www.xingtinghandle.com